After finishing the playback or recording, the machine driver might call snd_soc_dai_set_pll(codec, pll_id, 0, 0, 0) to stop the internal PLL, but with the codec driver nau8822, it will print error as below: nau8822 0-001a: Unsupported input clock 0 fsl-asoc-card sound-nau8822: failed to stop FLL: -22
Refer to the function wm8962_set_fll() in the codec driver wm8962, if the freq_out is zero, turn off the internal PLL and return 0.
Cc: David Lin ctlin0@nuvoton.com Cc: John Hsu kchsu0@nuvoton.com Cc: Seven Li wtli@nuvoton.com Signed-off-by: Hui Wang hui.wang@canonical.com --- sound/soc/codecs/nau8822.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c index b436e532993d..4d3720c69f91 100644 --- a/sound/soc/codecs/nau8822.c +++ b/sound/soc/codecs/nau8822.c @@ -726,6 +726,13 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source, struct nau8822_pll *pll_param = &nau8822->pll; int ret, fs;
+ if (freq_out == 0) { + dev_dbg(component->dev, "PLL disabled\n"); + snd_soc_component_update_bits(component, + NAU8822_REG_POWER_MANAGEMENT_1, NAU8822_PLL_EN_MASK, NAU8822_PLL_OFF); + return 0; + } + fs = freq_out / 256;
ret = nau8822_calc_pll(freq_in, fs, pll_param);