Hi,
+Ranjani who did the link reorder patch
On Fri, 21 Feb 2020, Jaroslav Kysela wrote:
This patch is for SOF v1.3 firmware. The DSP firmware will crash (DSP oops) without this patch. The 1.4.1 firmare has this issue fixed.
The ABI version is used for the comparison, because the firmware version for the firmware files before 1.4.2 was not set properly (git hash was used).
build fails when this is applied on broonie/for-next. You need an additional
--- a/sound/soc/sof/topology.c +++ b/sound/soc/sof/topology.c @@ -3108,6 +3108,7 @@ static int sof_link_load(struct snd_soc_component *scomp, int index, struct snd_soc_dai_link *link, struct snd_soc_tplg_link_config *cfg) { + struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); struct snd_soc_tplg_private *private = &cfg->priv;
/* set trigger order */link->trigger[0] = SND_SOC_DPCM_TRIGGER_POST;link->trigger[1] = SND_SOC_DPCM_TRIGGER_POST;
/* this causes DSP panic on firmware v1.3 */if (v->abi_version > SOF_ABI_VER(3, 7, 0)) {/* set trigger order */link->trigger[0] = SND_SOC_DPCM_TRIGGER_POST;link->trigger[1] = SND_SOC_DPCM_TRIGGER_POST;
My results with older firmwares and this patch are a bit mixed. When I apply this patch and boot with v1.3 FW on a CFL platform (ABI 3.7.0, version 1:1:0-5dd9a), I get a DSP panic at stream stop with this patch, but _without_ it, playback is fine. :P
I tested both v1.3.1 and v1.3, and I get a DSP panic at stream stop with your patch (ABI 3:7:0 on both of these so trigger order is not changed). With v1.4 and all newer, streaming works as expected.
The original problem was sensitive to timing, so apparently there is still some variation how this triggers on different platforms. With 1.4, 1.4.1 and 1.4.2 now out, primary solution is just to upgrade the firmware.
If this fix helps with some real-life case to cope with an old firmware, we should probably still consider this. Ranjani, does the above make sense?
Br, Kai