On Tue, 2011-02-08 at 13:47 +0000, ext Bensaid, Selma wrote:
For both configuration we have a set of HCI commands to configure the FM
audio
path and one of my concerns is to know if the wl1273_codec should handle the
audio path configuration
and the switch between FM and BT SCO?
It would be better if the codec could handle the configuration, depending on which DAI is in use. If we can send HCI commands from kernel, I think that would be the cleanest way.
If we use the Combined Interface Mode (host controls both the BT and FM radio via BT HCI) this could be possible. However, you use the Separate Interface (FM controlled vi I2C). Is there a plan to handle also the Combined Interface Mode for WL1273 FM Radio driver?
We haven't yet had need for the UART interface but it has been the idea to have them both eventually...
Cheers, Matti
Selma.
-- Péter
Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.