Hi Takashi,
When test HBR feature, unless specify the channel number in command line(as below), alsa will be confused about the real channel number.
aplay -D hdmi:DEV=1,AES0=0x06 -c8 -fs16_le -r192000 testi.dtshd.20120730.ma-71-24.spdif
If the HBR stream is gone through pulseaudio(regarded as passthrough), the channels number is faked.
Thanks --xingchao
-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel-bounces@alsa-project.org] On Behalf Of Wang Xingchao Sent: Tuesday, August 07, 2012 3:20 PM To: alsa-devel@alsa-project.org; tiwai@suse.de Cc: Wang, Xingchao Subject: [alsa-devel] [PATCH] ALSA: hda - Set channels count for HBR format
If it's HBR format, the channels count should be 8.
Signed-off-by: Wang Xingchao xingchao.wang@intel.com
sound/pci/hda/patch_hdmi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index ad319d4..ae4e67e 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1153,8 +1153,11 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hdmi_spec *spec = codec->spec; int pin_idx = hinfo_to_pin_index(spec, hinfo); hda_nid_t pin_nid = spec->pins[pin_idx].pin_nid;
- hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
- if (is_hbr_format(format))
hdmi_set_channel_count(codec, cvt_nid, 8);- else
hdmi_set_channel_count(codec, cvt_nid,substream->runtime->channels);
hdmi_setup_audio_infoframe(codec, pin_idx, substream);
-- 1.7.9.5
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel