The patch
ASoC: codecs: msm8916-wcd-analog: get micbias voltage from dt
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From e269998d588f8ad96eaf86916e23b8ee3d2b9f1b Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Thu, 17 Aug 2017 10:02:09 +0200 Subject: [PATCH] ASoC: codecs: msm8916-wcd-analog: get micbias voltage from dt
This patch adds bindings in DT to provide required micbias voltage which could be specific to board. With this new binding, now the mic bias voltage is left at hardware default value if the device tree does not specify any mic bias voltage value. Correct micbias value is required for mbhc buttons to work.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- .../bindings/sound/qcom,msm8916-wcd-analog.txt | 1 + sound/soc/codecs/msm8916-wcd-analog.c | 27 +++++++++++++++++----- 2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt index ccb401cfef9d..05b67a1d4851 100644 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt @@ -33,6 +33,7 @@ Required properties - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
Optional Properties: +- qcom,micbias-lvl: Voltage (mV) for Mic Bias - qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor connected. - qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c index a0de3e7204d5..8633524b1961 100644 --- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -93,8 +93,12 @@ #define MICB_1_EN_TX3_GND_SEL_TX_GND 0
#define CDC_A_MICB_1_VAL (0xf141) +#define MICB_MIN_VAL 1600 +#define MICB_STEP_SIZE 50 +#define MICB_VOLTAGE_REGVAL(v) ((v - MICB_MIN_VAL)/MICB_STEP_SIZE) #define MICB_1_VAL_MICB_OUT_VAL_MASK GENMASK(7, 3) #define MICB_1_VAL_MICB_OUT_VAL_V2P70V ((0x16) << 3) +#define MICB_1_VAL_MICB_OUT_VAL_V1P80V ((0x4) << 3) #define CDC_A_MICB_1_CTL (0xf142)
#define MICB_1_CTL_CFILT_REF_SEL_MASK BIT(1) @@ -225,6 +229,7 @@ struct pm8916_wcd_analog_priv { struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; unsigned int micbias1_cap_mode; unsigned int micbias2_cap_mode; + unsigned int micbias_mv; };
static const char *const adc2_mux_text[] = { "ZERO", "INP2", "INP3" }; @@ -265,18 +270,25 @@ static const struct snd_kcontrol_new pm8916_wcd_analog_snd_controls[] = {
static void pm8916_wcd_analog_micbias_enable(struct snd_soc_codec *codec) { + struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec); + snd_soc_update_bits(codec, CDC_A_MICB_1_CTL, MICB_1_CTL_EXT_PRECHARG_EN_MASK | MICB_1_CTL_INT_PRECHARG_BYP_MASK, MICB_1_CTL_INT_PRECHARG_BYP_EXT_PRECHRG_SEL | MICB_1_CTL_EXT_PRECHARG_EN_ENABLE);
- snd_soc_write(codec, CDC_A_MICB_1_VAL, MICB_1_VAL_MICB_OUT_VAL_V2P70V); - /* - * Special headset needs MICBIAS as 2.7V so wait for - * 50 msec for the MICBIAS to reach 2.7 volts. - */ - msleep(50); + if (wcd->micbias_mv) { + snd_soc_write(codec, CDC_A_MICB_1_VAL, + MICB_VOLTAGE_REGVAL(wcd->micbias_mv)); + /* + * Special headset needs MICBIAS as 2.7V so wait for + * 50 msec for the MICBIAS to reach 2.7 volts. + */ + if (wcd->micbias_mv >= 2700) + msleep(50); + } + snd_soc_update_bits(codec, CDC_A_MICB_1_CTL, MICB_1_CTL_EXT_PRECHARG_EN_MASK | MICB_1_CTL_INT_PRECHARG_BYP_MASK, 0); @@ -795,6 +807,9 @@ static int pm8916_wcd_analog_parse_dt(struct device *dev, else priv->micbias2_cap_mode = MICB_1_EN_NO_EXT_BYP_CAP;
+ of_property_read_u32(dev->of_node, "qcom,micbias-lvl", + &priv->micbias_mv); + return 0; }