Split the bytcr-rt5651 config into 1 .conf file per input / output as has already been done for the bytcr-rt5640 and the chtnau8824 profiles.
This allows easy creation of long-name profiles with the specific input / output combinations found on a board without needing to copy and paste things.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- src/conf/ucm/bytcr-rt5651/HiFi.conf | 197 +--------------------- src/conf/ucm/rt5651/HeadPhones.conf | 31 ++++ src/conf/ucm/rt5651/IN1-InternalMic.conf | 27 +++ src/conf/ucm/rt5651/IN12-InternalMic.conf | 31 ++++ src/conf/ucm/rt5651/IN2-InternalMic.conf | 27 +++ src/conf/ucm/rt5651/IN3-HeadsetMic.conf | 28 +++ src/conf/ucm/rt5651/Makefile.am | 4 +- src/conf/ucm/rt5651/Speaker.conf | 30 ++++ 8 files changed, 185 insertions(+), 190 deletions(-) create mode 100644 src/conf/ucm/rt5651/HeadPhones.conf create mode 100644 src/conf/ucm/rt5651/IN1-InternalMic.conf create mode 100644 src/conf/ucm/rt5651/IN12-InternalMic.conf create mode 100644 src/conf/ucm/rt5651/IN2-InternalMic.conf create mode 100644 src/conf/ucm/rt5651/IN3-HeadsetMic.conf create mode 100644 src/conf/ucm/rt5651/Speaker.conf
diff --git a/src/conf/ucm/bytcr-rt5651/HiFi.conf b/src/conf/ucm/bytcr-rt5651/HiFi.conf index 54c365d9..961b2604 100644 --- a/src/conf/ucm/bytcr-rt5651/HiFi.conf +++ b/src/conf/ucm/bytcr-rt5651/HiFi.conf @@ -1,5 +1,7 @@ # Adapted from https://github.com/plbossart/UCM/tree/master/bytcr-rt5651
+searchdir:ucm + SectionVerb { EnableSequence [ cdev "hw:bytcrrt5651" @@ -18,194 +20,11 @@ SectionVerb { } }
-SectionDevice."Headphones" { - Comment "Headphones playback" - - ConflictingDevice [ - "Speaker" - ] - - EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Headphones playback enable sequence" - cset "name='Headphone Switch' on" - cset "name='HPO L Playback Switch' on" - cset "name='HPO R Playback Switch' on" - # Done after turning the HP on to keep the bias and clk on - cset "name='Speaker Switch' off" - cset "name='LOUT L Playback Switch' off" - cset "name='LOUT R Playback Switch' off" - ] - - DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Headphones playback disable sequence" - # This is done by the Speaker EnableSequence, so that the - # Platform Clock and BIAS do not temporarily get turned off - # as that breaks audio-streams which are playing when - # switching between Speaker/Headphone - ] - - Value { - PlaybackChannels "2" - JackControl "Headphone Jack" - } -} - -SectionDevice."Speaker" { - Comment "Speaker playback" - - ConflictingDevice [ - "Headphones" - ] - - EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Speaker enable sequence" - cset "name='Speaker Switch' on" - cset "name='LOUT L Playback Switch' on" - cset "name='LOUT R Playback Switch' on" - # Done after turning the speaker on to keep the bias and clk on - cset "name='Headphone Switch' off" - cset "name='HPO L Playback Switch' off" - cset "name='HPO R Playback Switch' off" - ] - - DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Speaker disable sequence" - # This is done by the Headphones EnableSequence, so that the - # Platform Clock and BIAS do not temporarily get turned off - # as that breaks audio-streams which are playing when - # switching between Speaker/Headphone - ] - - Value { - PlaybackChannels "2" - } -} - -SectionDevice."InternalMic-IN1" { - Comment "Internal Microphone on IN1" - - ConflictingDevice [ - "InternalMic-IN2" - "InternalMic-IN12" - "HeadsetMic-IN3" - ] - - EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN1 Microphone enable sequence" - cset "name='Internal Mic Switch' on" - cset "name='RECMIXL BST1 Switch' on" - cset "name='RECMIXR BST1 Switch' on" - ] - - DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN1 Microphone disable sequence" - cset "name='Internal Mic Switch' off" - cset "name='RECMIXL BST1 Switch' off" - cset "name='RECMIXR BST1 Switch' off" - ] - - Value { - CaptureChannels "2" - } -} - -SectionDevice."InternalMic-IN2" { - Comment "Internal Microphone on IN2" - - ConflictingDevice [ - "InternalMic-IN1" - "InternalMic-IN12" - "HeadsetMic-IN3" - ] - - EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN2 Microphone enable sequence" - cset "name='Internal Mic Switch' on" - cset "name='RECMIXL BST2 Switch' on" - cset "name='RECMIXR BST2 Switch' on" - ] - - DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN2 Microphone disable sequence" - cset "name='Internal Mic Switch' off" - cset "name='RECMIXL BST2 Switch' off" - cset "name='RECMIXR BST2 Switch' off" - ] - - Value { - CaptureChannels "2" - } -} - -SectionDevice."InternalMic-IN12" { - Comment "Internal Microphones on IN1 and IN2" - - ConflictingDevice [ - "InternalMic-IN1" - "InternalMic-IN2" - "HeadsetMic-IN3" - ] - - EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN12 Microphone enable sequence" - cset "name='Internal Mic Switch' on" - cset "name='RECMIXL BST1 Switch' on" - cset "name='RECMIXR BST1 Switch' on" - cset "name='RECMIXL BST2 Switch' on" - cset "name='RECMIXR BST2 Switch' on" - ] - - DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo Internal Mic IN12 Microphone disable sequence" - cset "name='Internal Mic Switch' off" - cset "name='RECMIXL BST1 Switch' off" - cset "name='RECMIXR BST1 Switch' off" - cset "name='RECMIXL BST2 Switch' off" - cset "name='RECMIXR BST2 Switch' off" - ] - - Value { - CaptureChannels "2" - } -} - -SectionDevice."HeadsetMic-IN3" { - Comment "Headset Microphone" - - ConflictingDevice [ - "InternalMic-IN1" - "InternalMic-IN2" - "InternalMic-IN12" - ] +<rt5651/Speaker.conf> +<rt5651/HeadPhones.conf>
- EnableSequence [ - cdev "hw:bytcrrt5651" - exec "echo HeadsetMic-IN3 Microphone enable sequence" - cset "name='Headset Mic Switch' on" - cset "name='RECMIXL BST3 Switch' on" - cset "name='RECMIXR BST3 Switch' on" - ]
- DisableSequence [ - cdev "hw:bytcrrt5651" - exec "echo HeadsetMic-IN3 Microphone disable sequence" - cset "name='Headset Mic Switch' off" - cset "name='RECMIXL BST3 Switch' off" - cset "name='RECMIXR BST3 Switch' off" - ] - - Value { - CaptureChannels "2" - JackControl "Headset Mic Jack" - } -} +<rt5651/IN1-InternalMic.conf> +<rt5651/IN2-InternalMic.conf> +<rt5651/IN12-InternalMic.conf> +<rt5651/IN3-HeadsetMic.conf> diff --git a/src/conf/ucm/rt5651/HeadPhones.conf b/src/conf/ucm/rt5651/HeadPhones.conf new file mode 100644 index 00000000..b9323a36 --- /dev/null +++ b/src/conf/ucm/rt5651/HeadPhones.conf @@ -0,0 +1,31 @@ +SectionDevice."Headphones" { + Comment "Headphones" + + ConflictingDevice [ + "Speaker" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Headphone Switch' on" + cset "name='HPO L Playback Switch' on" + cset "name='HPO R Playback Switch' on" + # Done after turning the HP on to keep the bias and clk on + cset "name='Speaker Switch' off" + cset "name='LOUT L Playback Switch' off" + cset "name='LOUT R Playback Switch' off" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + # This is done by the Speaker EnableSequence, so that the + # Platform Clock and BIAS do not temporarily get turned off + # as that breaks audio-streams which are playing when + # switching between Speaker/Headphone + ] + + Value { + PlaybackChannels "2" + JackControl "Headphone Jack" + } +} diff --git a/src/conf/ucm/rt5651/IN1-InternalMic.conf b/src/conf/ucm/rt5651/IN1-InternalMic.conf new file mode 100644 index 00000000..85e25a5c --- /dev/null +++ b/src/conf/ucm/rt5651/IN1-InternalMic.conf @@ -0,0 +1,27 @@ +SectionDevice."InternalMic-IN1" { + Comment "Internal Microphone on IN1" + + ConflictingDevice [ + "InternalMic-IN2" + "InternalMic-IN12" + "HeadsetMic-IN3" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' on" + cset "name='RECMIXL BST1 Switch' on" + cset "name='RECMIXR BST1 Switch' on" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' off" + cset "name='RECMIXL BST1 Switch' off" + cset "name='RECMIXR BST1 Switch' off" + ] + + Value { + CaptureChannels "2" + } +} diff --git a/src/conf/ucm/rt5651/IN12-InternalMic.conf b/src/conf/ucm/rt5651/IN12-InternalMic.conf new file mode 100644 index 00000000..f1cc17fe --- /dev/null +++ b/src/conf/ucm/rt5651/IN12-InternalMic.conf @@ -0,0 +1,31 @@ +SectionDevice."InternalMic-IN12" { + Comment "Internal Microphones on IN1 and IN2" + + ConflictingDevice [ + "InternalMic-IN1" + "InternalMic-IN2" + "HeadsetMic-IN3" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' on" + cset "name='RECMIXL BST1 Switch' on" + cset "name='RECMIXR BST1 Switch' on" + cset "name='RECMIXL BST2 Switch' on" + cset "name='RECMIXR BST2 Switch' on" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' off" + cset "name='RECMIXL BST1 Switch' off" + cset "name='RECMIXR BST1 Switch' off" + cset "name='RECMIXL BST2 Switch' off" + cset "name='RECMIXR BST2 Switch' off" + ] + + Value { + CaptureChannels "2" + } +} diff --git a/src/conf/ucm/rt5651/IN2-InternalMic.conf b/src/conf/ucm/rt5651/IN2-InternalMic.conf new file mode 100644 index 00000000..18f74e1a --- /dev/null +++ b/src/conf/ucm/rt5651/IN2-InternalMic.conf @@ -0,0 +1,27 @@ +SectionDevice."InternalMic-IN2" { + Comment "Internal Microphone on IN2" + + ConflictingDevice [ + "InternalMic-IN1" + "InternalMic-IN12" + "HeadsetMic-IN3" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' on" + cset "name='RECMIXL BST2 Switch' on" + cset "name='RECMIXR BST2 Switch' on" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Internal Mic Switch' off" + cset "name='RECMIXL BST2 Switch' off" + cset "name='RECMIXR BST2 Switch' off" + ] + + Value { + CaptureChannels "2" + } +} diff --git a/src/conf/ucm/rt5651/IN3-HeadsetMic.conf b/src/conf/ucm/rt5651/IN3-HeadsetMic.conf new file mode 100644 index 00000000..bfd0b009 --- /dev/null +++ b/src/conf/ucm/rt5651/IN3-HeadsetMic.conf @@ -0,0 +1,28 @@ +SectionDevice."HeadsetMic-IN3" { + Comment "Headset Microphone" + + ConflictingDevice [ + "InternalMic-IN1" + "InternalMic-IN2" + "InternalMic-IN12" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Headset Mic Switch' on" + cset "name='RECMIXL BST3 Switch' on" + cset "name='RECMIXR BST3 Switch' on" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Headset Mic Switch' off" + cset "name='RECMIXL BST3 Switch' off" + cset "name='RECMIXR BST3 Switch' off" + ] + + Value { + CaptureChannels "2" + JackControl "Headset Mic Jack" + } +} diff --git a/src/conf/ucm/rt5651/Makefile.am b/src/conf/ucm/rt5651/Makefile.am index 8a22159c..abd45ad7 100644 --- a/src/conf/ucm/rt5651/Makefile.am +++ b/src/conf/ucm/rt5651/Makefile.am @@ -1,4 +1,6 @@ alsaconfigdir = @ALSA_CONFIG_DIR@ ucmdir = $(alsaconfigdir)/ucm/rt5651 -ucm_DATA = EnableSeq.conf +ucm_DATA = EnableSeq.conf HeadPhones.conf IN1-InternalMic.conf \ + IN2-InternalMic.conf IN12-InternalMic.conf IN3-HeadsetMic.conf \ + Speaker.conf EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/rt5651/Speaker.conf b/src/conf/ucm/rt5651/Speaker.conf new file mode 100644 index 00000000..44168cc5 --- /dev/null +++ b/src/conf/ucm/rt5651/Speaker.conf @@ -0,0 +1,30 @@ +SectionDevice."Speaker" { + Comment "Speakers" + + ConflictingDevice [ + "Headphones" + ] + + EnableSequence [ + cdev "hw:bytcrrt5651" + cset "name='Speaker Switch' on" + cset "name='LOUT L Playback Switch' on" + cset "name='LOUT R Playback Switch' on" + # Done after turning the speaker on to keep the bias and clk on + cset "name='Headphone Switch' off" + cset "name='HPO L Playback Switch' off" + cset "name='HPO R Playback Switch' off" + ] + + DisableSequence [ + cdev "hw:bytcrrt5651" + # This is done by the Headphones EnableSequence, so that the + # Platform Clock and BIAS do not temporarily get turned off + # as that breaks audio-streams which are playing when + # switching between Speaker/Headphone + ] + + Value { + PlaybackChannels "2" + } +}