On 21/08/11 17:02, Dong Aisheng wrote:
- add different clkmux mode handling for record.
SAIF can use two instances to implement full duplex (playback & recording) and record saif may work on EXTMASTER mode that is using other saif's BITCLK&LRCLK. The clkmux mode is determined by saif's platform data and machine specific clkmux setting is done in pdata->init(). 2. support playback and capture simutaneously however the sample rates can not be different due to hw limitation.
Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Mark Brown broonie@opensource.wolfsonmicro.com Cc: Liam Girdwood lrg@ti.com Cc: Sascha Hauer s.hauer@pengutronix.de Cc: Wolfram Sang w.sang@pengutronix.de
Looks fine, just some minor questions below.
include/sound/saif.h | 16 +++++ sound/soc/mxs/mxs-saif.c | 162 ++++++++++++++++++++++++++++++++++++++++++---- sound/soc/mxs/mxs-saif.h | 4 + 3 files changed, 168 insertions(+), 14 deletions(-)
diff --git a/include/sound/saif.h b/include/sound/saif.h new file mode 100644 index 0000000..7a98d9b --- /dev/null +++ b/include/sound/saif.h @@ -0,0 +1,16 @@ +/*
- Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#ifndef __MACH_MXS_SAIF_H__ +#define __MACH_MXS_SAIF_H__
The macro naming here should probably match the sound directory/driver
+struct mxs_saif_platform_data {
unsigned int clkmux;
int (*init) (void);
+}; +#endif diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 530017f..eb8ba79 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -27,15 +27,39 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/saif.h> #include <mach/dma.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/mxs.h> +#include <mach/digctl.h>
#include "mxs-saif.h"
static struct mxs_saif *mxs_saif[2];
+/*
- SAIF is a little different with other normal SOC DAIs on clock using.
- For MXS, two SAIF modules are instantiated on-chip.
- Each SAIF has a set of clock pins and can be operating in master
- mode simultaneously if they are connected to different off-chip codecs.
- Also, one of the two SAIFs can master or drive the clock pins while the
- other SAIF, in slave mode, receives clocking from the master SAIF.
- This also means that both SAIFs must operate at the same sample rate.
- Following are the valid configurations for SAIF1 and SAIF2 on the i.MX28
- HW_SAIF_CLKMUX_SEL:
- DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
clock pins selected for SAIF1 input clocks.
- CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
SAIF0 clock inputs selected for SAIF1 input clocks.
- EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
clocks.
- EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
clocks.
- */
static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) { @@ -52,6 +76,36 @@ static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, }
/*
- Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
- is provided by other SAIF, we provide a interface here to get its master.
- Note that for DIRECT mode, it's master is itself.
- */
+static struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif) +{
struct mxs_saif *master_saif;
/* get master saif according to different clkmux setting */
switch (saif->clkmux) {
case MXS_DIGCTL_SAIF_CLKMUX_DIRECT:
master_saif = saif;
break;
case MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT:
master_saif = saif->id ? mxs_saif[1] : mxs_saif[0];
break;
case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0:
master_saif = mxs_saif[0];
break;
case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1:
master_saif = mxs_saif[1];
break;
default:
return NULL;
}
return master_saif;
+}
+/*
- Set SAIF clock and MCLK
*/ static int mxs_saif_set_clk(struct mxs_saif *saif, @@ -60,8 +114,27 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, { u32 scr; int ret;
struct mxs_saif *master_saif;
scr = __raw_readl(saif->base + SAIF_CTRL);
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
/* Set master saif to generate proper clock */
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
dev_dbg(saif->dev, "master saif%d clkmux 0x%x\n",
master_saif->id, saif->clkmux);
/* Checking if can playback and capture simutaneously */
if (master_saif->ongoing && rate != master_saif->cur_rate) {
dev_err(saif->dev,
"can not change clock, master saif%d(rate %d) is ongoing\n",
master_saif->id, master_saif->cur_rate);
return -EINVAL;
}
scr = __raw_readl(master_saif->base + SAIF_CTRL); scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE; scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
@@ -75,27 +148,29 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, * * If MCLK is not used, we just set saif clk to 512*fs. */
if (saif->mclk_in_use) {
if (master_saif->mclk_in_use) { if (mclk % 32 == 0) { scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(saif->clk, 512 * rate);
ret = clk_set_rate(master_saif->clk, 512 * rate); } else if (mclk % 48 == 0) { scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(saif->clk, 384 * rate);
ret = clk_set_rate(master_saif->clk, 384 * rate); } else { /* SAIF MCLK should be either 32x or 48x */ return -EINVAL; } } else {
ret = clk_set_rate(saif->clk, 512 * rate);
ret = clk_set_rate(master_saif->clk, 512 * rate); scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; } if (ret) return ret;
if (!saif->mclk_in_use) {
__raw_writel(scr, saif->base + SAIF_CTRL);
master_saif->cur_rate = rate;
if (!master_saif->mclk_in_use) {
__raw_writel(scr, master_saif->base + SAIF_CTRL); return 0; }
@@ -137,7 +212,7 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, return -EINVAL; }
__raw_writel(scr, saif->base + SAIF_CTRL);
__raw_writel(scr, master_saif->base + SAIF_CTRL); return 0;
} @@ -183,6 +258,7 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, struct mxs_saif *saif = mxs_saif[saif_id]; u32 stat; int ret;
struct mxs_saif *master_saif; if (!saif) return -EINVAL;
@@ -195,6 +271,12 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, __raw_writel(BM_SAIF_CTRL_CLKGATE, saif->base + SAIF_CTRL + MXS_CLR_ADDR);
master_saif = mxs_saif_get_master(saif);
if (saif != master_saif) {
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT); if (stat & BM_SAIF_STAT_BUSY) { dev_err(saif->dev, "error: busy\n");
@@ -278,10 +360,21 @@ static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) /* * Note: We simply just support master mode since SAIF TX can only * work as master.
* Here the master is relative to codec side.
* Saif internally could be slave when working on EXTMASTER mode.
* We just hide this to machine driver. */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS:
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
if (saif->clkmux == MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0)
scr = saif->id ? scr | BM_SAIF_CTRL_SLAVE_MODE :
scr & ~BM_SAIF_CTRL_SLAVE_MODE;
else if (saif->clkmux == MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1)
scr = saif->id ? scr & ~BM_SAIF_CTRL_SLAVE_MODE :
scr | BM_SAIF_CTRL_SLAVE_MODE;
else
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
__raw_writel(scr | scr0, saif->base + SAIF_CTRL); break; default:
@@ -396,6 +489,11 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *cpu_dai) { struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
struct mxs_saif *master_saif;
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL; switch (cmd) { case SNDRV_PCM_TRIGGER_START:
@@ -403,10 +501,20 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: dev_dbg(cpu_dai->dev, "start\n");
clk_enable(saif->clk);
if (!saif->mclk_in_use)
clk_enable(master_saif->clk);
if (!master_saif->mclk_in_use)
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
/*
* If the saif's master is not himself, we also need to enable
* itself clk for its internal basic logic to work.
*/
if (saif != master_saif) {
clk_enable(saif->clk); __raw_writel(BM_SAIF_CTRL_RUN, saif->base + SAIF_CTRL + MXS_SET_ADDR);
} if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { /*
@@ -422,20 +530,37 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, __raw_readl(saif->base + SAIF_DATA); }
dev_dbg(cpu_dai->dev, "CTRL 0x%x STAT 0x%x\n",
master_saif->ongoing = 1;
dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n", __raw_readl(saif->base + SAIF_CTRL), __raw_readl(saif->base + SAIF_STAT));
dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(master_saif->base + SAIF_CTRL),
__raw_readl(master_saif->base + SAIF_STAT)); break; case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: dev_dbg(cpu_dai->dev, "stop\n");
clk_disable(saif->clk);
if (!saif->mclk_in_use)
if (!master_saif->mclk_in_use) {
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(100);
}
clk_disable(master_saif->clk);
if (saif != master_saif) { __raw_writel(BM_SAIF_CTRL_RUN, saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* wait a while for the current sample to complete */
udelay(100);
This is a little short to cover 8kHz sample rate (125us). It may be worthwhile to calc the delay based on the rate here.
clk_disable(saif->clk);
}
master_saif->ongoing = 0; break; default:
@@ -519,15 +644,24 @@ static int mxs_saif_probe(struct platform_device *pdev) { struct resource *res; struct mxs_saif *saif;
struct mxs_saif_platform_data *pdata; int ret = 0;
pdata = pdev->dev.platform_data;
if (pdata && pdata->init())
return -EINVAL;
saif = kzalloc(sizeof(*saif), GFP_KERNEL); if (!saif) return -ENOMEM;
if (pdata)
saif->clkmux = pdata->clkmux;
if (pdev->id >= ARRAY_SIZE(mxs_saif)) return -EINVAL; mxs_saif[pdev->id] = saif;
saif->id = pdev->id; saif->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(saif->clk)) {
diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h index 0e2ff8c..2a6aec1 100644 --- a/sound/soc/mxs/mxs-saif.h +++ b/sound/soc/mxs/mxs-saif.h @@ -118,6 +118,10 @@ struct mxs_saif { void __iomem *base; int irq; struct mxs_pcm_dma_params dma_param;
unsigned int id;
unsigned int clkmux;
unsigned int cur_rate;
unsigned int ongoing; struct platform_device *soc_platform_pdev; u32 fifo_underrun;
-- 1.7.0.4