Currently we can the accdet mutex from within DAPM when updating the device state which means we take accdet then the CODEC mutex but we also do the locking the other way around when responding to the jackdet IRQ. Move all the jackdet use of the CODEC mutex out of the accdet lock to avoid this. Since all the DAPM interactions depend only on a single threaded IRQ this is still serialised.
The locking improvements in 3.5 allow a better solution there.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8994.c | 50 +++++++++++++++++++++++--------------------- 1 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1a967d9..ac0cd4b 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3193,6 +3193,7 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data) struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; int reg; + bool present;
mutex_lock(&wm8994->accdet_lock);
@@ -3205,11 +3206,10 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
dev_dbg(codec->dev, "JACKDET %x\n", reg);
- if (reg & WM1811_JACKDET_LVL) { - dev_dbg(codec->dev, "Jack detected\n"); + present = reg & WM1811_JACKDET_LVL;
- snd_soc_jack_report(wm8994->micdet[0].jack, - SND_JACK_MECHANICAL, SND_JACK_MECHANICAL); + if (present) { + dev_dbg(codec->dev, "Jack detected\n");
snd_soc_update_bits(codec, WM8958_MICBIAS2, WM8958_MICB2_DISCH, 0); @@ -3227,32 +3227,12 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
snd_soc_update_bits(codec, WM8958_MIC_DETECT_1, WM8958_MICD_ENA, WM8958_MICD_ENA); - - /* If required for an external cap force MICBIAS on */ - if (wm8994->pdata->jd_ext_cap) { - mutex_lock(&codec->mutex); - snd_soc_dapm_force_enable_pin(&codec->dapm, - "MICBIAS2"); - snd_soc_dapm_sync(&codec->dapm); - mutex_unlock(&codec->mutex); - } } else { dev_dbg(codec->dev, "Jack not detected\n");
snd_soc_update_bits(codec, WM8958_MICBIAS2, WM8958_MICB2_DISCH, WM8958_MICB2_DISCH);
- if (wm8994->pdata->jd_ext_cap) { - mutex_lock(&codec->mutex); - snd_soc_dapm_disable_pin(&codec->dapm, "MICBIAS2"); - snd_soc_dapm_sync(&codec->dapm); - mutex_unlock(&codec->mutex); - } - - snd_soc_jack_report(wm8994->micdet[0].jack, 0, - SND_JACK_MECHANICAL | SND_JACK_HEADSET | - wm8994->btn_mask); - /* Enable debounce while removed */ snd_soc_update_bits(codec, WM1811_JACKDET_CTRL, WM1811_JACKDET_DB, WM1811_JACKDET_DB); @@ -3266,6 +3246,28 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
mutex_unlock(&wm8994->accdet_lock);
+ /* If required for an external cap force MICBIAS on */ + if (wm8994->pdata->jd_ext_cap) { + mutex_lock(&codec->mutex); + + if (present) + snd_soc_dapm_force_enable_pin(&codec->dapm, + "MICBIAS2"); + else + snd_soc_dapm_disable_pin(&codec->dapm, "MICBIAS2"); + + snd_soc_dapm_sync(&codec->dapm); + mutex_unlock(&codec->mutex); + } + + if (present) + snd_soc_jack_report(wm8994->micdet[0].jack, + SND_JACK_MECHANICAL, SND_JACK_MECHANICAL); + else + snd_soc_jack_report(wm8994->micdet[0].jack, 0, + SND_JACK_MECHANICAL | SND_JACK_HEADSET | + wm8994->btn_mask); + return IRQ_HANDLED; }