Thank you for timely feedback.
I have fixed all except following.
---------------------------------------------------------------------------------------------------------------------------------------------------
case SND_SOC_DAPM_PRE_PMU:if (cs43130->pll_bypass)cs43130_change_clksrc(codec, CS43130_MCLK_SRC_XTAL);elsecs43130_change_clksrc(codec, CS43130_MCLK_SRC_PLL);usleep_range(10000, 10050);/*ASP_3ST = 0 in master mode*/if (cs43130->dai_mode)regmap_update_bits(cs43130->regmap, CS43130_PAD_INT_CFG,0x01, 0x00);
No need to undo this in slave mode?
Master mode specific configuration
---------------------------------------------------------------------------------------------------------------------------------------------------
/* Enable HP detect */regmap_update_bits(cs43130->regmap, CS43130_HP_DETECT,CS43130_HP_DETECT_CTRL_MASK, CS43130_HP_DETECT_CTRL_MASK);
Why enable this when the only handling is a couple of log messages?
Placeholder for driver modification when the driver is integrated to system such as Android OS.
I suppose I could remove it, but when the driver is integrated into actual system, it may not be clear to system integrators, where to add HP DET IRQ hooks
---------------------------------------------------------------------------------------------------------------------------------------------------
regmap_update_bits(cs43130->regmap, CS43130_PLL_SET_9,CS43130_PLL_REF_PREDIV_MASK,pll_ratio_table[i].sclk_prediv);
There's no need for the ); to be on a new line here, nor for the extra indentation on the line before. There are lots more coding style issues, checkpatch will probably pick up many of them.
Fixed.
Regarding regmap_update_bits(), while I could make this API call in two lines, often the two lines exceed 80 character limit, mandated by Linux. If exceeding 80 char limit is ok, then I can certainly modify the API call.
checkpatch.pl did not flag additional formatting issues except for
"Possible switch case/default not preceeded by break or fallthrough comment"
which I believe should be ok
________________________________________ From: Mark Brown [broonie@kernel.org] Sent: Thursday, December 08, 2016 10:23 AM To: Xu, Li Cc: alsa-devel@alsa-project.org; devicetree@vger.kernel.org; lgirdwood@gmail.com; robh+dt@kernel.org; mark.rutland@arm.com; perex@perex.cz; tiwai@suse.com; Austin, Brian; Handrigan, Paul Subject: Re: [PATCH 1/2] ASoC: Add support for CS43130 codec
On Wed, Dec 07, 2016 at 02:17:27PM -0600, Li Xu wrote:
Overall this looks pretty good - there's a fair number of issues below but they're all fairly simple stylistic things rather than anything majorly wrong so hopefully should be easy to correct.
select SND_SOC_CS53L30 if I2C
select SND_SOC_CS43130 if I2C select SND_SOC_CX20442 if TTY
Please keep Kconfig and Makefile sorted.
+static bool cs43130_volatile_register(struct device *dev, unsigned int reg) +{
switch (reg) {case CS43130_DEVID_AB ... CS43130_SUBREV_ID:case CS43130_INT_STATUS_1 ... CS43130_INT_STATUS_5:return true;
You don't need to mark the device ID volatile, just don't provide defaults and regmap will cache it the first time it reads it. If the device ID is volatile you've got bigger problems.
/*PDN_PLL= 0,enable*/
Please use the standard kernel coding style, need spaces here.
regmap_update_bits(cs43130->regmap, CS43130_PLL_SET_9,CS43130_PLL_REF_PREDIV_MASK,pll_ratio_table[i].sclk_prediv);
There's no need for the ); to be on a new line here, nor for the extra indentation on the line before. There are lots more coding style issues, checkpatch will probably pick up many of them.
case SND_SOC_DAPM_PRE_PMU:if (cs43130->pll_bypass)cs43130_change_clksrc(codec, CS43130_MCLK_SRC_XTAL);elsecs43130_change_clksrc(codec, CS43130_MCLK_SRC_PLL);usleep_range(10000, 10050);/*ASP_3ST = 0 in master mode*/if (cs43130->dai_mode)regmap_update_bits(cs43130->regmap, CS43130_PAD_INT_CFG,0x01, 0x00);
No need to undo this in slave mode?
if (stickies[0] & CS43130_XTAL_ERR_INT)pr_debug("%s: Crystal err\n", __func__);
dev_ prints and shouldn't this one be an error?
/* Enable HP detect */regmap_update_bits(cs43130->regmap, CS43130_HP_DETECT,CS43130_HP_DETECT_CTRL_MASK, CS43130_HP_DETECT_CTRL_MASK);
Why enable this when the only handling is a couple of log messages?
+#ifdef CONFIG_PM +static int cs43130_runtime_suspend(struct device *dev) +{
return 0;+}
Remove empty functions, they don't serve any purpose.