[alsa-devel] Play a sine wave with alsa

10 May 2012


      I've written this code to play a sine wave but I don't think it's right.
Could you tell me where I am wrong?
Especially I don't know what period_time and buffer_time are. What I
have to do to extend the playback time?
Code:
#include <alsa/asoundlib.h>
#include <math.h>
int main() {
  int err;
  snd_pcm_t *handle;
  snd_pcm_hw_params_t *params;
  unsigned int Fc, val;
  int channels=2;
  int size;
  int dir=0;
  unsigned int period_time= 400000;
  unsigned int buffer_time= 800000;
  snd_pcm_uframes_t frames;
  snd_pcm_uframes_t bufferSize;
  char *buffer;
/* Open PCM device for playback. */
  err = snd_pcm_open(&handle, "default",SND_PCM_STREAM_PLAYBACK, 0);
if (err < 0) {
    fprintf(stderr,"unable to open pcm device: %s\n",snd_strerror(err));
    exit(1);
  }
snd_pcm_hw_params_alloca(&params);
  err=snd_pcm_hw_params_any(handle, params);
  if (err < 0) {
  printf("Broken configuration for playback: no configurations
available: %s\n", snd_strerror(err));
    return err;
  }
  err = snd_pcm_hw_params_set_access(handle, params,
SND_PCM_ACCESS_RW_INTERLEAVED);
if (err < 0) {
     printf("Access type not available for playback: %s\n",
snd_strerror(err));
     return err;
  }
  err=snd_pcm_hw_params_set_format(handle, params,
SND_PCM_FORMAT_S16_LE);
  if (err < 0) {
     printf("Sample format not available for playback: %s\n",
snd_strerror(err));
     return err;
  }
  err = snd_pcm_hw_params_set_channels(handle, params, channels);
  if (err < 0) {
     printf("Channels count (%i) not available for playbacks: %s\n",
channels, snd_strerror(err));
     return err;
  }
  Fc = 5000;
  dir=1;
  err=snd_pcm_hw_params_set_rate_near(handle, params, &Fc, &dir);
  if (err < 0) {
     printf("Rate %iHz not available for playback: %s\n", Fc,
snd_strerror(err));
     return err;
  }
  dir=0;
err = snd_pcm_hw_params_set_period_time_near(handle, params,
&period_time, &dir);
  if (err < 0) {
                printf("Unable to set period time %i for playback:
%s\n", period_time, snd_strerror(err));
                 return err;
  }
  err = snd_pcm_hw_params_set_buffer_time_near(handle, params,
&buffer_time, &dir);
         if (err < 0) {
                 printf("Unable to set buffer time %i for playback:
%s\n", buffer_time, snd_strerror(err));
                 return err;
         }
err = snd_pcm_hw_params(handle, params);
  if (err < 0) {
     printf("Unable to set hw params for playback: %s\n",
snd_strerror(err));
     return err;
  }
/* Use a buffer large enough to hold one period */
  snd_pcm_hw_params_get_period_size(params, &frames, 0);
size = frames * 4;
short buf[size];
  unsigned short ampiezza;
  double frequenza = 500;
  double omega; /* Pulsazione */
  int x;
omega = 2 * M_PI * frequenza / 180;
  ampiezza = 20000;
for (x = 0; x < size ; x++)
    {
      buf[x] = (short)(ampiezza * (sin (omega*x)));
    }
err = snd_pcm_writei(handle, buf, frames);
    if (err == -EPIPE) {
      fprintf(stderr, "underrun occurred\n");
      snd_pcm_prepare(handle);
    } else if (err < 0) {
      fprintf(stderr,
              "error from writei: %s\n",
              snd_strerror(err));
    }  else if (err != (int)frames) {
      fprintf(stderr,
              "short write, write %d frames\n", err);
    }
snd_pcm_drain(handle);
  snd_pcm_close(handle);
return 0;
}

[alsa-devel] Play a sine wave with alsa

Luca Longhi