(adding back list in Cc, it was lost)
On Mon, 13 Feb 2012 10:02:27 +0800, LydiaWang@viatech.com.cn wrote :
-----邮件原件----- 发件人: Anisse Astier [mailto:anisse@astier.eu] 发送时间: 2012年2月11日 1:56 收件人: alsa-devel@alsa-project.org 抄送: Takashi Iwai; Lydia Wang 主题: VT1705 : Mic not working with power_save
Hi,
On the hardware described in attached alsa-info (VT1705), I have the following problem:
- mic doesn't work
- if, while recording, we switch "input source", mic works during the recording session.
Passing power_save=0 as a parameter to snd-hda-intel solves the problem.
It was reproduced on linus' master branch, tiwai's for-next branch, and 3.2 branch.
Regards,
Anisse
Hi,
The log showed that your machine had two microphones, one is an internal mic, and the other is a rear mic. Which microphone did you use? The log showed currently used mic is the internal mic. The rear mic was not plugged in a jack.
Lydia
On this hardware, there's only an internal mic, and no physical jack to plug another input.