Re: [alsa-devel] [PATCH V2 1/2] ASoC: dt-bindings: fsl_asrc: add compatible string for imx8qm

Hi Rob, Nicolin

Hi Rob

...

On Wed, Oct 30, 2019 at 07:41:26PM +0800, Shengjiu Wang wrote:

...

In order to support the two asrc modules in imx8qm, we need to add compatible string "fsl,imx8qm-asrc0" and "fsl,imx8qm-asrc1"

Are the blocks different in some way?

If not, why do you need to distinguish them?

The internal clock mapping is different for each module.

Or we can use one compatible string, but need add another property "fsl,asrc-clk-map" to distinguish the different clock map.

The change is in below.

Which one do you think is better?

Required properties:

• • compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".

• • compatible : Contains "fsl,imx35-asrc", "fsl,imx53-asrc",

•                     "fsl,imx8qm-asrc".
  
  

  • reg : Offset and length of the register set for the device.

@@ -35,6 +36,11 @@ Required properties:

- fsl,asrc-width    : Defines a mutual sample width used by DPCM Back

Ends.

• • fsl,asrc-clk-map : Defines clock map used in driver. which is required

•                     by imx8qm
  

•                     <0> - select the map for asrc0
  

•                     <1> - select the map for asrc1
  

Optional properties:

I will do a update for this change in v3.

Best regards Wang shengjiu