On 2/15/16 1:36 PM, Carlo Caione wrote:
From: Carlo Caione carlo@endlessm.com
We cannot use strcpy() to write to a const char * location. This is causing a 'BUG: unable to handle kernel paging request' error at boot when using the cht-bsw-rt5645 driver.
With this patch we also fix a wrong indexing in the driver where the codec_name of the wrong dai_link is being overwritten.
Signed-off-by: Carlo Caione carlo@endlessm.com
sound/soc/intel/atom/sst-atom-controls.h | 1 + sound/soc/intel/boards/cht_bsw_rt5645.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/atom/sst-atom-controls.h b/sound/soc/intel/atom/sst-atom-controls.h index e011311..6f88d1c 100644 --- a/sound/soc/intel/atom/sst-atom-controls.h +++ b/sound/soc/intel/atom/sst-atom-controls.h @@ -30,6 +30,7 @@ enum { MERR_DPCM_AUDIO = 0, MERR_DPCM_DEEP_BUFFER, MERR_DPCM_COMPR,
MERR_DPCM_BE, };
/* define a bit for each mixer input */
diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c index e6cf800..89b4c032 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5645.c +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c @@ -282,7 +282,7 @@ static struct snd_soc_dai_link cht_dailink[] = { }, /* CODEC<->CODEC link */ /* back ends */
- {
- [MERR_DPCM_BE] = { .name = "SSP2-Codec", .be_id = 1, .cpu_dai_name = "ssp2-port",
@@ -357,7 +357,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) card->dev = &pdev->dev; sprintf(codec_name, "i2c-%s:00", drv->acpi_card->codec_id); /* set correct codec name */
- strcpy((char *)card->dai_link[2].codec_name, codec_name);
- card->dai_link[MERR_DPCM_BE].codec_name = kstrdup(codec_name, GFP_KERNEL);
It's probably less problematic to find the index in a different way. Adding a new definition in the platform driver doesn't seem quite right.