Takashi Iwai wrote:
At Tue, 26 May 2009 01:19:06 +0200, Pavel Hofman wrote:
Hi,
while trying to dive into complexities of intel8x0.c I found the following:
static struct snd_pci_quirk intel8x0_clock_list[] __devinitdata = { SND_PCI_QUIRK(0x0e11, 0x008a, "AD1885", 41000), SND_PCI_QUIRK(0x1028, 0x00be, "AD1885", 44100), .....
Is it really supposed to be 41000, instead of 44100?
Looks like so, judging from the patch Jaroslav wrote.
In static int snd_intel8x0_pcm_open(struct snd_pcm_substream *substream, struct ichdev *ichdev) ... runtime->hw.rates = ichdev->pcm->rates;
The pcm field in ichdev is snd_ac97, while the rates field in snd_ac97 is defined
unsigned int rates[6]; /* see AC97_RATES_* defines */
I guess this way always rates[0] from the list is taken, unlike e.g. in via82xx.c: runtime->hw.rates = chip->ac97->rates[AC97_RATES_SPDIF];
41000 is the base clock. The actual rate written is
rate * clock / 48000
Normally the base clock is 48000. But some boards have a different base clock and the rate has to be adjusted to match with that.
Takashi, thanks for your answer, 41000 is OK.
How about the second question regarding the assignment of rates field being an array? I am remotely troubleshooting SPDIF output of Dell D600 which seems to be stuck at 48kHz (plughw always resamples to 48kHz, even though the analog PCM accepts 44.1kHz. The above mentioned code is related to this (not exactly the cause though.
Thanks a lot,
Pavel.