Am Mittwoch, dem 02.02.2022 um 16:45 +0000 schrieb Charles Keepax:
When the DMIC_ENA bit is set the analogue inputs are disconnected from the digital core of the chip, in favour of the digital microphones. Currently the driver will always enable DMIC_ENA whilst the GPIOs are configured for the DMIC function, this means the user can't currently use both the analog inputs and the digital inputs in one system.
Add an additional DAPM mutex that allows switching between analog and digital inputs into the digital core.
Reported-by: Martin Kepplinger martin.kepplinger@puri.sm
Hi Charles, thank you again very much for this! You can make this
Reported-and-tested-by: Martin Kepplinger martin.kepplinger@puri.sm
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
sound/soc/codecs/wm8962.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index a5584ba962dcf..2c41d31956aa8 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2049,6 +2049,13 @@ static SOC_ENUM_SINGLE_DECL(hpoutl_enum, static const struct snd_kcontrol_new hpoutl_mux = SOC_DAPM_ENUM("HPOUTL Mux", hpoutl_enum); +static const char * const input_mode_text[] = { "Analog", "Digital" };
+static SOC_ENUM_SINGLE_VIRT_DECL(input_mode_enum, input_mode_text);
+static const struct snd_kcontrol_new input_mode_mux = + SOC_DAPM_ENUM("Input Mode", input_mode_enum);
static const struct snd_kcontrol_new inpgal[] = { SOC_DAPM_SINGLE("IN1L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 3, 1, 0), SOC_DAPM_SINGLE("IN2L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 2, 1, 0), @@ -2147,6 +2154,9 @@ SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1, 4, 0, SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0), +SND_SOC_DAPM_MUX("Input Mode L", SND_SOC_NOPM, 0, 0, &input_mode_mux), +SND_SOC_DAPM_MUX("Input Mode R", SND_SOC_NOPM, 0, 0, &input_mode_mux),
SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0), SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0), @@ -2226,16 +2236,19 @@ static const struct snd_soc_dapm_route wm8962_intercon[] = { { "DMIC_ENA", NULL, "DMICDAT" }, + { "Input Mode L", "Analog", "MIXINL" }, + { "Input Mode L", "Digital", "DMIC_ENA" }, + { "Input Mode R", "Analog", "MIXINR" }, + { "Input Mode R", "Digital", "DMIC_ENA" },
{ "ADCL", NULL, "SYSCLK" }, { "ADCL", NULL, "TOCLK" }, - { "ADCL", NULL, "MIXINL" }, - { "ADCL", NULL, "DMIC_ENA" }, + { "ADCL", NULL, "Input Mode L" }, { "ADCL", NULL, "DSP2" }, { "ADCR", NULL, "SYSCLK" }, { "ADCR", NULL, "TOCLK" }, - { "ADCR", NULL, "MIXINR" }, - { "ADCR", NULL, "DMIC_ENA" }, + { "ADCR", NULL, "Input Mode R" }, { "ADCR", NULL, "DSP2" }, { "STL", "Left", "ADCL" },