Re: [alsa-devel] [PATCH] ASoC: Add PCM1681 codec driver.

Hi Marek,

On 26.06.2013 15:05, Marek Belisko wrote:

PCM1681 can be controlled via I2C, SPI or in bootstrap mode. This code add support only for I2C mode.

Signed-off-by: Marek Belisko marek.belisko@streamunlimited.com

.../devicetree/bindings/sound/ti,pcm1681.txt | 15 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/pcm1681.c | 328 ++++++++++++++++++++ 4 files changed, 349 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm1681.txt create mode 100644 sound/soc/codecs/pcm1681.c

diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt new file mode 100644 index 0000000..4df1718 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt @@ -0,0 +1,15 @@ +Texas Instruments PCM1681 8-channel PWM Processor

+Required properties:

• • compatible: Should contain "ti,pcm1681".
• • reg: The i2c address. Should contain <0x4c>.

+Examples:

• i2c_bus {

• pcm1681@4c {
  

• 	compatible = "ti,pcm1681";
  

• 	reg = <0x4c>;
  

• };
  

• };

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index badb6fb..e2daf82 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -54,6 +54,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MC13783 if MFD_MC13XXX select SND_SOC_ML26124 if I2C select SND_SOC_HDMI_CODEC

• select SND_SOC_PCM1681 if I2C select SND_SOC_PCM3008 select SND_SOC_RT5631 if I2C select SND_SOC_RT5640 if I2C

@@ -292,6 +293,9 @@ config SND_SOC_MAX9850 config SND_SOC_HDMI_CODEC tristate

+config SND_SOC_PCM1681

•   tristate
  

config SND_SOC_PCM3008 tristate

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 70fd806..4a068d2 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -42,6 +42,7 @@ snd-soc-max9850-objs := max9850.o snd-soc-mc13783-objs := mc13783.o snd-soc-ml26124-objs := ml26124.o snd-soc-hdmi-codec-objs := hdmi.o +snd-soc-pcm1681-objs := pcm1681.o snd-soc-pcm3008-objs := pcm3008.o snd-soc-rt5631-objs := rt5631.o snd-soc-rt5640-objs := rt5640.o @@ -171,6 +172,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o +obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o diff --git a/sound/soc/codecs/pcm1681.c b/sound/soc/codecs/pcm1681.c new file mode 100644 index 0000000..6122fd1 --- /dev/null +++ b/sound/soc/codecs/pcm1681.c @@ -0,0 +1,328 @@ +/*

• • PCM1681 ASoC codec driver
• • Copyright (c) StreamUnlimited GmbH 2013
• • Marek Belisko marek.belisko@streamunlimited.com
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License
• • as published by the Free Software Foundation; either version 2
• • of the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• */

+#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h>

+#define PCM1681_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \

• 	     SNDRV_PCM_FMTBIT_S24_LE)
  

+#define PCM1681_PCM_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \

• 	     SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
  

• 	     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
  

• 	     SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000)
  

+#define PCM1681_SOFT_MUTE_ALL 0xff +#define PCM1681_DEEMPH_RATE_MASK 0x18 +#define PCM1681_DEEMPH_MASK 0x01

+#define PCM1681_ATT_CONTROL(X) (X <= 6 ? X : X + 9) /* Attenuation level */ +#define PCM1681_SOFT_MUTE 0x07 /* Soft mute control register */ +#define PCM1681_DAC_CONTROL 0x08 /* DAC operation control */ +#define PCM1681_FMT_CONTROL 0x09 /* Audio interface data format */ +#define PCM1681_DEEMPH_CONTROL 0x0a /* De-emphasis control */ +#define PCM1681_ZERO_DETECT_STATUS 0x0e /* Zero detect status reg */

+static const struct reg_default pcm1681_reg_defaults[] = {

• { 0x01, 0xff },
• { 0x02, 0xff },
• { 0x03, 0xff },
• { 0x04, 0xff },
• { 0x05, 0xff },
• { 0x06, 0xff },
• { 0x07, 0x00 },
• { 0x08, 0x00 },
• { 0x09, 0x06 },
• { 0x0A, 0x00 },
• { 0x0B, 0xff },
• { 0x0C, 0x0f },
• { 0x0D, 0x00 },
• { 0x10, 0xff },
• { 0x11, 0xff },
• { 0x12, 0x00 },
• { 0x13, 0x00 },

+};

+static bool pcm1681_accessible_reg(struct device *dev, unsigned int reg) +{

• return !((reg == 0x00) || (reg == 0x0f));

+}

+static bool pcm1681_writeable_reg(struct device *dev, unsigned register reg) +{

• return pcm1681_accessible_reg(dev, reg) &&

• (reg != PCM1681_ZERO_DETECT_STATUS);
  

+}

+struct pcm1681_private {

• struct regmap *regmap;
• unsigned int format;
• /* Current deemphasis status */
• unsigned int deemph;
• /* Current rate for deemphasis control */
• unsigned int rate;

+};

+static int pcm1681_deemph[] = { 44100, 48000, 32000 };

+static int pcm1681_set_deemph(struct snd_soc_codec *codec) +{

• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• int i = 0, val = -1, ret;
• if (priv->deemph)

• for (i = 0; i < ARRAY_SIZE(pcm1681_deemph); i++)
  

• 	if (pcm1681_deemph[i] == priv->rate)
  

• 		val = i;
  

• /* enable choosen frequency */
• if (val != -1)

• regmap_update_bits(priv->regmap, PCM1681_DEEMPH_CONTROL,
  

• 			PCM1681_DEEMPH_RATE_MASK, val);
  

• /* enable/disable deemphasis functionality */
• ret = regmap_update_bits(priv->regmap, PCM1681_DEEMPH_CONTROL,

• 		PCM1681_DEEMPH_MASK, priv->deemph);
  

• return ret;

+}

+static int pcm1681_get_deemph(struct snd_kcontrol *kcontrol,

• 	      struct snd_ctl_elem_value *ucontrol)
  

+{

• struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• ucontrol->value.enumerated.item[0] = priv->deemph;
• return 0;

+}

+static int pcm1681_put_deemph(struct snd_kcontrol *kcontrol,

• 	      struct snd_ctl_elem_value *ucontrol)
  

+{

• struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• priv->deemph = ucontrol->value.enumerated.item[0];
• return pcm1681_set_deemph(codec);

+}

+static int pcm1681_set_dai_fmt(struct snd_soc_dai *codec_dai,

• 	      unsigned int format)
  

+{

• struct snd_soc_codec *codec = codec_dai->codec;
• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• /* The PCM1681 can only be slave to all clocks */
• if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {

• dev_err(codec->dev, "Invalid clocking mode\n");
  

• return -EINVAL;
  

• }
• priv->format = format;
• return 0;

+}

+static int pcm1681_digital_mute(struct snd_soc_dai *dai, int mute) +{

• struct snd_soc_codec *codec = dai->codec;
• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• int ret, val = 0;
• if (mute)

• val = PCM1681_SOFT_MUTE_ALL;
  

• ret = regmap_write(priv->regmap, PCM1681_SOFT_MUTE, val);
• if (ret < 0)

• return ret;
  

• return 0;

+}

+static int pcm1681_hw_params(struct snd_pcm_substream *substream,

• 	     struct snd_pcm_hw_params *params,
  

• 	     struct snd_soc_dai *dai)
  

+{

• struct snd_soc_codec *codec = dai->codec;
• struct pcm1681_private *priv = snd_soc_codec_get_drvdata(codec);
• int val = 0;
• int pcm_format = params_format(params);
• priv->rate = params_rate(params);
• switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
• case SND_SOC_DAIFMT_RIGHT_J:

• if (pcm_format == SNDRV_PCM_FORMAT_S24_LE)
  

• 	val = 0x00;
  

• else if (pcm_format == SNDRV_PCM_FORMAT_S16_LE)
  

• 	val = 0x03;
  

• break;
  

• case SND_SOC_DAIFMT_I2S:

• val = 0x04;
  

• break;
  

• case SND_SOC_DAIFMT_LEFT_J:

• val = 0x05;
  

• break;
  

• default:

• dev_err(codec->dev, "Invalid DAI format\n");
  

• return -EINVAL;
  

• }
• regmap_update_bits(priv->regmap, PCM1681_FMT_CONTROL, 0x0f, val);
• return 0;

+}

+static const struct snd_soc_dai_ops pcm1681_dai_ops = {

• .set_fmt = pcm1681_set_dai_fmt,
• .hw_params = pcm1681_hw_params,
• .digital_mute = pcm1681_digital_mute,

+};

+static const DECLARE_TLV_DB_SCALE(pcm1681_dac_tlv, -6350, 50, 1);

+static const struct snd_kcontrol_new pcm1681_controls[] = {

• SOC_DOUBLE_R_TLV("PCM1681 Channel 1/2 Playback Volume",

• 	PCM1681_ATT_CONTROL(1), PCM1681_ATT_CONTROL(2), 0,
  

• 	0x7f, 0, pcm1681_dac_tlv),
  

• SOC_DOUBLE_R_TLV("PCM1681 Channel 3/4 Playback Volume",

• 	PCM1681_ATT_CONTROL(3), PCM1681_ATT_CONTROL(4), 0,
  

• 	0x7f, 0, pcm1681_dac_tlv),
  

• SOC_DOUBLE_R_TLV("PCM1681 Channel 5/6 Playback Volume",

• 	PCM1681_ATT_CONTROL(5), PCM1681_ATT_CONTROL(6), 0,
  

• 	0x7f, 0, pcm1681_dac_tlv),
  

• SOC_DOUBLE_R_TLV("PCM1681 Channel 7/8 Playback Volume",

• 	PCM1681_ATT_CONTROL(7), PCM1681_ATT_CONTROL(8), 0,
  

• 	0x7f, 0, pcm1681_dac_tlv),
  

• SOC_SINGLE_BOOL_EXT("PCM1681 De-emphasis Switch", 0,

• 	    pcm1681_get_deemph, pcm1681_put_deemph),
  

+};

+struct snd_soc_dai_driver pcm1681_dai = {

• .name = "pcm1681-hifi",
• .playback = {

• .stream_name = "Playback",
  

• .channels_min = 2,
  

• .channels_max = 8,
  

• .rates = PCM1681_PCM_RATES,
  

• .formats = PCM1681_PCM_FORMATS,
  

• },
• .ops = &pcm1681_dai_ops,

+};

+#ifdef CONFIG_OF +static const struct of_device_id pcm1681_dt_ids[] = {

• { .compatible = "ti,pcm1681", },
• { }

+}; +MODULE_DEVICE_TABLE(of, pcm1681_dt_ids); +#endif

+static const struct regmap_config pcm1681_regmap = {

• .reg_bits = 8,
• .val_bits = 8,
• .max_register = ARRAY_SIZE(pcm1681_reg_defaults),
• .reg_defaults = pcm1681_reg_defaults,
• .num_reg_defaults = ARRAY_SIZE(pcm1681_reg_defaults),
• .writeable_reg = pcm1681_writeable_reg,
• .readable_reg = pcm1681_accessible_reg,

+};

+static int pcm1681_probe(struct snd_soc_codec *codec) +{

• return 0;

Is there really nothing the driver has to do in order to bring the codec into full operation mode?

+}

+static int pcm1681_remove(struct snd_soc_codec *codec) +{

• return 0;

+}

+static struct snd_soc_codec_driver soc_codec_dev_pcm1681 = {

• .probe = pcm1681_probe,
• .remove = pcm1681_remove,
• .controls = pcm1681_controls,
• .num_controls = ARRAY_SIZE(pcm1681_controls),

+};

+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static const struct i2c_device_id pcm1681_i2c_id[] = {

• {"pcm1681", 0},
• {}

+}; +MODULE_DEVICE_TABLE(i2c, pcm1681_i2c_id);

+static int pcm1681_i2c_probe(struct i2c_client *client,

• 	      const struct i2c_device_id *id)
  

+{

• int ret;
• struct pcm1681_private *priv;
• priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
• if (!priv)

• return -ENOMEM;
  

• priv->regmap = devm_regmap_init_i2c(client, &pcm1681_regmap);
• if (IS_ERR(priv->regmap)) {

• ret = PTR_ERR(priv->regmap);
  

• dev_err(&client->dev, "Failed to create regmap: %d\n", ret);
  

• return ret;
  

• }
• i2c_set_clientdata(client, priv);

Is there any way to probe the device is there at all? I'd like to bail early in case the bus or i2c address doesn't match for example.

Also, I wonder whether there are any reset lines that might be connected to GPIOs of the MCU. If so, it would be good idea to add support for that in this driver. But that can be done at some later point as well.

Best, Daniel