SPDIF is limited to 2 channels when using PCM. DTS/AC3 is the only way to get multi-channel out of SPDIF.
Unless you run ADAT, which is 8 channels uncompressed 24bit/48kHz, but I'm not sure that's supported in Linux.
IDT PC Audio Marketing Engineer/Linux Manager W: (512) 330-3127
-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel-bounces@alsa-project.org] On Behalf Of Nathan Schulte Sent: Tuesday, April 29, 2008 2:01 PM To: Tellman, Steven Cc: Takashi Iwai; Greg Zornetzer; alsa-devel@alsa-project.org; Matthew Ranostay Subject: Re: [alsa-devel] help with idt 92hd206 codec for intel hda?
Well, when I first installed my distro, I managed to get the spdif to output 2 channels. I could only get two channels, unless i sent a raw DTS or AC3 stream for decoding on the receiver end.
Now, on after I reinstalled (changed from raid0 to raid5), I cannot get any audio whatsoever (even via analog outs).
So there are really two separate issues now.
1) Getting audio to work. 2) Getting 6+ Channel audio via spdif.
Should I try applying these patches or should I try compiling ALSA by hand instead of using the distro supplied package?
Also, after looking at the sigmatel patch for hda-intel, the 92xx chips are limited to two channels via spdif... On my first install, I changed the limit, and recompiled by hand. ALSA would then tell me that 6 channels was ok, as opposed to throwing an error, yet I still only got two channels.
Ideas?
-Nate
On Tue, Apr 29, 2008 at 1:19 PM, Tellman, Steven Steven.Tellman@idt.com wrote:
Are you having issues with that board? The 92HD202 has the same ID as
the
STAC9221.
IDT *PC Audio* Marketing Engineer/Linux Manager
W: (512) 330-3127
*From:* Nathan Schulte [mailto:reklipz@gmail.com] *Sent:* Tuesday, April 29, 2008 12:02 PM *To:* Takashi Iwai *Cc:* Greg Zornetzer; alsa-devel@alsa-project.org; Tellman, Steven; Matthew Ranostay *Subject:* Re: [alsa-devel] help with idt 92hd206 codec for intel hda?
I recently purchased an ECS A740GM-M Motherboard which has also an IDT 92HD202 integrated audio chipset.
ALSA is recognizing it as a SigmaTel 9221 A2.
I'm willing to test these patches as well as give any information you
guys
might need.
-Nate
(sorry for any duplicate messages, I'm still trying to get hold of how this listing thing works...)
On Tue, Apr 29, 2008 at 11:47 AM, Takashi Iwai tiwai@suse.de wrote:
At Tue, 29 Apr 2008 17:48:53 +0200,
I wrote:
At Sun, 27 Apr 2008 01:38:19 -0500, Greg Zornetzer wrote:
Hi all, I recently acquired an ECS GF7100PVT-M3 motherboard, which appears
to
use
the IDT 92HD206 codec for HDA. Unfortunately, it doesn't appear
to
have
full support under ALSA. It gets detected as another Sigmatel
chip.
Analog
stereo output appears to work, but the mixer doesn't find any of
the
normal
inputs.
I found the tech specs for the chip at http://www.idt.com/products/getDoc.cfm?docID=13461840 I've attached an lspci output and the codec file to this email.
I'm
not
much of an driver hacker, but if someone could give me an idea of
what
needs
to go into the patch_sigmatel.c file to make this thing work, I'd
be
willing
to try. I'm also more than willing to test out patches on my
setup.
The below is an entirely untested patch quickly made from the codec information you posted. Could you give it a try with the latest
ALSA
HG version?
Steven informed that this codec is compatible with STAC927x. So the revised patch below is dramatically shorter. Try this one instead of the previous one.
thanks,
Takashi
diff -r 19b486f73bd8 pci/hda/patch_sigmatel.c --- a/pci/hda/patch_sigmatel.c Fri Apr 25 14:25:04 2008 +0200
+++ b/pci/hda/patch_sigmatel.c Tue Apr 29 20:43:43 2008 +0200 @@ -4289,6 +4289,8 @@
{ .id = 0x83847635, .name = "STAC9250D", .patch =
patch_stac925x },
{ .id = 0x83847636, .name = "STAC9251", .patch = patch_stac925x
},
{ .id = 0x83847637, .name = "STAC9250D", .patch =
patch_stac925x },
{ .id = 0x83847645, .name = "92HD206X", .patch =
patch_stac927x },
{ .id = 0x83847646, .name = "92HD206D", .patch =
patch_stac927x },
/* The following does not take into account .id=0x83847661 whensubsys = * 104D0C00 which is STAC9225s. Because of this, some SZ
Notebooks
are * currently not fully supported. _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel