On Fri, Dec 9, 2016 at 8:01 PM, Irina Tirdea irina.tirdea@intel.com wrote:
The BayTrail and CherryTrail platforms provide platform clocks through their Power Management Controller (PMC).
The SoC supports up to 6 clocks (PMC_PLT_CLK[5:0]) with a frequency of either 19.2 MHz (PLL) or 25 MHz (XTAL) for BayTrail an a frequency of 19.2 MHz (XTAL) for CherryTrail. These clocks are available for general system use, where appropriate. For example, the usage for platform clocks suggested in the datasheet is the following: PLT_CLK[2:0] - Camera PLT_CLK[3] - Audio Codec PLT_CLK[4] - PLT_CLK[5] - COMMs
Signed-off-by: Irina Tirdea irina.tirdea@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Same comments as per patch 1/3.
drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/pmc_atom.c | 78 ++++++++++++++++++++++++++++--
include/linux/platform_data/x86/pmc_atom.h | 3 ++
Same.
3 files changed, 79 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 21dce1e..c1b07ed 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1032,3 +1032,4 @@ endif # X86_PLATFORM_DEVICES config PMC_ATOM def_bool y depends on PCI
select COMMON_CLKdiff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c index b53fbc1..324c44f 100644 --- a/drivers/platform/x86/pmc_atom.c +++ b/drivers/platform/x86/pmc_atom.c @@ -22,6 +22,8 @@ #include <linux/seq_file.h> #include <linux/io.h> #include <linux/platform_data/x86/pmc_atom.h>
+#include <linux/platform_device.h>
It should go after (e comes after a).
+#include <linux/platform_data/x86/clk-byt-plt.h>
struct pmc_bit_map { const char *name; @@ -36,6 +38,11 @@ struct pmc_reg_map { const struct pmc_bit_map *pss; };
+struct pmc_data {
const struct pmc_reg_map *map;const struct pmc_clk *clks;
clks -> clocks
+};
struct pmc_dev { u32 base_addr; void __iomem *regmap; @@ -49,6 +56,29 @@ struct pmc_dev { static struct pmc_dev pmc_device; static u32 acpi_base_addr;
+static const struct pmc_clk byt_clks[] = {
{.name = "xtal",.freq = 25000000,.parent_name = NULL,},{.name = "pll",.freq = 19200000,.parent_name = "xtal",},{},+};
+static const struct pmc_clk cht_clks[] = {
{.name = "xtal",.freq = 19200000,.parent_name = NULL,},{},+};
Okay, this is definition of clock trees. It means that clk-x86-pmc can be used basically on any of PMC that provides similar clock tree, right?
static const struct pmc_bit_map d3_sts_0_map[] = { {"LPSS1_F0_DMA", BIT_LPSS1_F0_DMA}, {"LPSS1_F1_PWM1", BIT_LPSS1_F1_PWM1}, @@ -168,6 +198,16 @@ struct pmc_dev { .pss = cht_pss_map, };
+static const struct pmc_data byt_data = {
.map = &byt_reg_map,.clks = byt_clks,+};
+static const struct pmc_data cht_data = {
.map = &cht_reg_map,.clks = cht_clks,+};
static inline u32 pmc_reg_read(struct pmc_dev *pmc, int reg_offset) { return readl(pmc->regmap + reg_offset); @@ -381,10 +421,36 @@ static int pmc_dbgfs_register(struct pmc_dev *pmc) } #endif /* CONFIG_DEBUG_FS */
+static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap,
_clks -> _clocks
const struct pmc_data *pmc_data)+{
struct platform_device *clkdev;struct pmc_clk_data *clk_data;clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
Can we just use stack for that?
if (!clk_data)return -ENOMEM;clk_data->base = pmc_regmap + PMC_CLK_CTL_0;clk_data->clks = pmc_data->clks;clkdev = platform_device_register_data(&pdev->dev, "clk-byt-plt", -1,
-1 has a definition in this case. AUTO smth... or NONE, I don't remember which one.
clk_data, sizeof(*clk_data));if (IS_ERR(clkdev)) {kfree(clk_data);return PTR_ERR(clkdev);}kfree(clk_data);return 0;+}
static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) { struct pmc_dev *pmc = &pmc_device;
const struct pmc_reg_map *map = (struct pmc_reg_map *)ent->driver_data;
const struct pmc_data *data = (struct pmc_data *)ent->driver_data;const struct pmc_reg_map *map = data->map; int ret; /* Obtain ACPI base address */@@ -413,6 +479,12 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) dev_warn(&pdev->dev, "debugfs register failed\n");
/* Register platform clocks - PMC_PLT_CLK [5:0] */ret = pmc_setup_clks(pdev, pmc->regmap, data);if (ret)dev_warn(&pdev->dev, "platform clocks register failed: %d\n",ret);pmc->init = true; return ret;} @@ -423,8 +495,8 @@ static int pmc_setup_dev(struct pci_dev *pdev, const struct pci_device_id *ent)
- used by pci_match_id() call below.
*/ static const struct pci_device_id pmc_pci_ids[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_VLV_PMC), (kernel_ulong_t)&byt_reg_map },{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CHT_PMC), (kernel_ulong_t)&cht_reg_map },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_VLV_PMC), (kernel_ulong_t)&byt_data },{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CHT_PMC), (kernel_ulong_t)&cht_data }, { 0, },};
diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h index aa8744c..2d310cf 100644 --- a/include/linux/platform_data/x86/pmc_atom.h +++ b/include/linux/platform_data/x86/pmc_atom.h @@ -50,6 +50,9 @@ BIT_ORED_DEDICATED_IRQ_GPSC | \ BIT_SHARED_IRQ_GPSS)
+/* Platform clock control registers */ +#define PMC_CLK_CTL_0 0x60
/* The timers acumulate time spent in sleep state */
Typo: accumulate
#define PMC_S0IR_TMR 0x80 #define PMC_S0I1_TMR 0x84