On 22/09/2023 09:58, Herve Codina wrote:
The QMC (QUICC mutichannel controller) is a controller present in some PowerQUICC SoC such as MPC885. The QMC HDLC uses the QMC controller to transfer HDLC data.
Additionally, a framer can be connected to the QMC HDLC. If present, this framer is the interface between the TDM bus used by the QMC HDLC and the E1/T1 line. The QMC HDLC can use this framer to get information about the E1/T1 line and configure the E1/T1 line.
Signed-off-by: Herve Codina herve.codina@bootlin.com
.../soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml index 82d9beb48e00..61dfd5ef7407 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -101,6 +101,27 @@ patternProperties: Channel assigned Rx time-slots within the Rx time-slots routed by the TSA to this cell.
compatible:
const: fsl,qmc-hdlc
Why this is not a device/SoC specific compatible?
fsl,framer:
$ref: /schemas/types.yaml#/definitions/phandle
description:
phandle to the framer node. The framer is in charge of an E1/T1 line
interface connected to the TDM bus. It can be used to get the E1/T1 line
status such as link up/down.
- allOf:
- if:
properties:
compatible:
not:
contains:
const: fsl,qmc-hdlc
then:
properties:
fsl,framer: false
- required: - reg - fsl,tx-ts-mask
@@ -159,5 +180,8 @@ examples: fsl,operational-mode = "hdlc"; fsl,tx-ts-mask = <0x00000000 0x0000ff00>; fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
compatible = "fsl,qmc-hdlc";
compatible is always the first property.
};fsl,framer = <&framer>; };
Best regards, Krzysztof