Yes, you are right. remove the EnableSeq.conf stupid Disable all output, i can get speaker and headphone work on ubuntu focal with pulseaudio. if remove JackHWMute "Speaker", speaker and headphone both has sound.
2020-04-13 22:39 GMT+08:00, Hans de Goede hdegoede@redhat.com:
Hi,
On 4/13/20 3:19 PM, youling257 wrote:
please also remove es8316 HeadPhones.conf JackHWMute "Speaker"
Erm, no that is not right. The ES8316 actually needs this.
The es8316 actually only has 1 amplified output (and no un-amplified outputs IIRC). In the reference designs (appnote) for the es8316 the output is actually switched in hardware based on jack-detect.
In practice this is implemented by connecting the L/R speaker output signals *directly* to the jack and through a analog switch which is controlled through a GPIO to the speakers.
So when headphones are plugged in we can (and must) disable the analog-switch so that the speakers are disconnected from the outputs and the outputs only drive the headphones.
If we remove the JackHWMute "Speaker" and then switch the sound to the speakers, the sound will be send to both the speakers and the headphones at the same time; there is no way to turn off the headphones.
So we need the JackHWMute "Speaker" here.
Regards,
Hans