On Mon, Jun 16, 2014 at 02:39:45AM +0300, Anssi Hannula wrote:
The S/PDIF rxtx4 and rxtx6 clock inputs are "ESAI_HCKT" and "MLB clock", respectively, according to the SoC documentation, and they are currently mapped to clocks "esai" and "mlb".
However, they do not seem to actually work correctly. Testing on a Cubox-i system with fsl_spdif driver forced to select one of those as input will result in I/O errors on audio playback, which I believe means missing clock signal.
Possibly the "ESAI_HCKT" and "MLB clock" refer to some other clocks related to ESAI and MLB, or we are missing something else.
Yes, they are actually the clocks from outside of SoC: HCKT of ESAI could be set as an input PAD while MLB clock is the bit clock used by MLB.
Since audio playback will not work if fsl_spdif selects these clocks (which happens rarely), set the inputs do dummy clocks, at least for now.
Signed-off-by: Anssi Hannula anssi.hannula@iki.fi Cc: Nicolin Chen Guangyu.Chen@freescale.com
Acked, thank you. Nicolin
Cc: Mark Brown broonie@kernel.org
Does anyone know what is wrong here? i.e. are the clocks actually wrong or are we maybe doing something wrong with their setup?
Also, is this the correct way to "fix" the issue, or should we rather modify the driver to not select rxtx4/rxtx6 for now (assuming no one knows how to fix this properly, of course)? (I haven't been involved with device trees before)
arch/arm/boot/dts/imx6qdl.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 3aef9a2f5fda..f0d1c2334952 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -182,8 +182,8 @@ dma-names = "rx", "tx"; clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 0>,
<&clks 0>, <&clks 118>,<&clks 0>, <&clks 139>,
<&clks 0>, <&clks 0>,<&clks 0>, <&clks 0>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2",-- 1.8.4.5