At Mon, 27 Jun 2011 22:08:29 +0200, Julian Sikorski wrote:
W dniu 27.06.2011 14:32, Takashi Iwai pisze:
At Mon, 27 Jun 2011 11:19:36 +0200, Takashi Iwai wrote:
At Mon, 27 Jun 2011 08:21:26 +0200, Julian Sikorski wrote:
W dniu 27.06.2011 08:04, Takashi Iwai pisze:
At Sat, 25 Jun 2011 14:01:06 +0200, Julian Sikorski wrote:
W dniu 25.06.2011 13:31, Julian Sikorski pisze: > W dniu 25.06.2011 13:08, Julian Sikorski pisze: >> W dniu 25.06.2011 09:11, Takashi Iwai pisze: >>> At Fri, 24 Jun 2011 13:25:53 +0200, >>> Julian Sikorski wrote: >>>> >>>> On 24/06/2011 11:12, Takashi Iwai wrote: >>>>> At Fri, 24 Jun 2011 10:34:01 +0200, >>>>> Takashi Iwai wrote: >>>>>> >>>>>> At Thu, 23 Jun 2011 18:40:47 +0200, >>>>>> Julian Sikorski wrote: >>>>>>> >>>>>>> On 23/06/2011 14:41, Takashi Iwai wrote: >>>>>>>> At Thu, 23 Jun 2011 08:36:55 +0200, >>>>>>>> Julian Sikorski wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I am coming here from pulseaudio-general mailing list [1]. I recently >>>>>>>>> got myself a Clevo P150HM laptop. It has 2.1 speakers, a built-in >>>>>>>>> microphone and the following connectors: >>>>>>>>> - headphone out >>>>>>>>> - microphone in; can be switched to center/lfe out >>>>>>>>> - spdif out; can be switched to rear speaker out >>>>>>>>> - line in; can be switched to side speaker out >>>>>>>>> Alsa does not seem to reflect that the device is capable of 5.1 and 7.1 >>>>>>>>> sound, and there are two configs showing up in pavucontrol (analog >>>>>>>>> output and analog headphones) which seem to be the same. I have uploaded >>>>>>>>> the output of alsa-info.sh [2]. Please let me know if more information >>>>>>>>> is needed. >>>>>>>> >>>>>>>> The current parser doesn't allow the multi-io pins when the primary >>>>>>>> output is no line-out. The patch below should fix (change) the >>>>>>>> behavior. It'll count HP out, too. >>>>>>>> >>>>>>>> >>>>>>>> Takashi >>>>>>>> >>>>>>>> --- >>>>>>>> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c >>>>>>>> index fe56b2b..b0cf726 100644 >>>>>>>> --- a/sound/pci/hda/patch_realtek.c >>>>>>>> +++ b/sound/pci/hda/patch_realtek.c >>>>>>>> @@ -18992,6 +18992,7 @@ static int alc662_auto_fill_dac_nids(struct hda_codec *codec, >>>>>>>> hda_nid_t dac; >>>>>>>> >>>>>>>> spec->multiout.dac_nids = spec->private_dac_nids; >>>>>>>> + spec->multiout.num_dacs = 0; >>>>>>>> for (i = 0; i< cfg->line_outs; i++) { >>>>>>>> dac = alc_auto_look_for_dac(codec, cfg->line_out_pins[i]); >>>>>>>> if (!dac) >>>>>>>> @@ -19326,8 +19327,20 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec) >>>>>>>> unsigned int location, defcfg; >>>>>>>> int num_pins; >>>>>>>> >>>>>>>> + if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT&& cfg->hp_outs == 1) { >>>>>>>> + /* use HP as primary out */ >>>>>>>> + cfg->speaker_outs = cfg->line_outs; >>>>>>>> + memcpy(cfg->speaker_pins, cfg->line_out_pins, >>>>>>>> + sizeof(cfg->speaker_pins)); >>>>>>>> + cfg->line_outs = cfg->hp_outs; >>>>>>>> + memcpy(cfg->line_out_pins, cfg->hp_pins, sizeof(cfg->hp_pins)); >>>>>>>> + cfg->hp_outs = 0; >>>>>>>> + memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins)); >>>>>>>> + cfg->line_out_type = AUTO_PIN_HP_OUT; >>>>>>>> + alc662_auto_fill_dac_nids(codec, cfg); >>>>>>>> + } >>>>>>>> if (cfg->line_outs != 1 || >>>>>>>> - cfg->line_out_type != AUTO_PIN_LINE_OUT) >>>>>>>> + cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) >>>>>>>> return 0; >>>>>>>> >>>>>>>> defcfg = snd_hda_codec_get_pincfg(codec, cfg->line_out_pins[0]); >>>>>>>> @@ -19348,6 +19361,8 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec) >>>>>>>> spec->multi_ios = num_pins; >>>>>>>> spec->ext_channel_count = 2; >>>>>>>> spec->multiout.num_dacs = num_pins + 1; >>>>>>>> + /* for avoiding multi HP mixers */ >>>>>>>> + cfg->line_out_type = AUTO_PIN_LINE_OUT; >>>>>>>> } >>>>>>>> return 0; >>>>>>>> } >>>>>>> Would you like me to test this patch? If so, what should I apply it to >>>>>>> and how should I proceed? >>>>>> >>>>>> Yes, the test would be appreciated, of course. >>>>>> Apply it to the latest 3.0-rc kernel and test. >>>>> >>>>> Also, the additional patch below will give "Headphone" mixer control >>>>> back while new "Surround", "Center" and "LFE" will appear. >>>>> >>>>> Note that you'll need to change "Channel Mode" mixer control to "6ch" >>>>> for using the surround outputs even with these patches. As default, >>>>> it's set as "2ch". >>>>> >>>>> >>>>> Takashi >>>>> >>>> I will definitely try to give this a shot, but the outcome might be >>>> dependent on the fact whether Fedora 15 will want to work with 3.0-rc >>>> kernel. >>> >>> You can build the kernel by yourself at any time... >>> >>>> How about 8-channel sound btw? Under Windows the device claims to be >>>> capable of it. >>> >>> Do you have 4 jacks? Otherwise it's nonsense. >>> >>> >>> Takashi >> OK, I was able to successfully apply the patch and build the kernel. I >> tested it using: >> $ pasuspender bash >> $ speaker-test -Dplug:surround51 -c6 >> Once I set sound to 6-channel using alsamixer -c0, I was able to hear >> the sound for all 6 channels. Setting it to 4 channels took away LFE and >> center. Pulseaudio outputs are still a little messy, but this is out of >> ALSA scope, I think. >> >> Julian > It seems I spoke a bit too soon. The superfluous controls are still a > problem. Speaker and Headphone controls seem to be overlapping (new > output on amixer -c0 attached). They both control the headphones when > they are plugged in and internal speakers when not. > > Julian > Sorry for this email bombardment, but I just booted back to stock F15 kernel (2.6.38.8-32.fc15.x86_64) and noticed that speaker and headphone controls actually do what they advertise. Still, it is impossible to make the sound go through the speakers when headphones are plugged in (I tried pavucontrol for this).
The auto-mute feature can be controlled "Auto-Mute Mode" mixer enum. Set to "Disabled" will turn off the auto-mute in the driver side. However...
You are right - when auto-mute is disabled sound goes via both speakers and headphones when they are plugged. I did not know the function of auto-mute. However, the "Speaker" and "Headphone" controls still do influence both outputs, and "Speaker" can only be muted - there is no volume control available. So, in my opinion, they should either be merged altogether, or switched back to the way they work in 2.6.38.8-32.fc15.x86_64, that is setting the volume of speakers and headphones independently.
Give alsa-info.sh outputs on your machine with the latest status for further analysis.
I think this issue was fixed now in topic/hda branch in sound git tree: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
Give it a try. You can pull the branch into the latest Linus git tree for merging into the latest 3.0-rc.
Takashi
It seems like the problem is still there. The output of alsa-info.sh is available here: http://www.alsa-project.org/db/?f=38e2e44ab86691006a837715601aad4311fda0d3
Double-check whether you compiled really the right stuff. The emulator works fine, so something wrong likely in your side.
Takashi