Dear friends,
I have a Dell L702X laptop which comes with a 2.1 sound configuration - 2 speakers + subwoofer from JBL. Sound is suberb in Windows, but I can't get the subwoofer to work in Linux!
Here's the information I think you need:
&&&&&@dell-xps:~$ aplay -l **** Lista de Dispositivos PLAYBACK Hardware **** placa 0: PCH [HDA Intel PCH], dispositivo 0: ALC665 Analog [ALC665 Analog] Dispositivo secundário: 1/1 Dispositivo secundário #0: subdevice #0 placa 0: PCH [HDA Intel PCH], dispositivo 1: ALC665 Digital [ALC665 Digital] Dispositivo secundário: 1/1 Dispositivo secundário #0: subdevice #0 placa 0: PCH [HDA Intel PCH], dispositivo 3: HDMI 0 [HDMI 0] Dispositivo secundário: 1/1 Dispositivo secundário #0: subdevice #0
#######@dell-xps:~$ aplay -L default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions
))))))))@dell-xps:~$ lspci -v | grep -A7 -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04b8 Flags: bus master, fast devsel, latency 0, IRQ 54 Memory at f3c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
^^^^^^@dell-xps:~$ cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC665 Codec: Intel CougarPoint HDMI
I've installed Realtek audio drivers and pretty much tried all tweaks on alsa .conf files a pulse .conf files.
As I said, currently the stereo sound is good on both speakers, but how can I get the subwoofer to work?
THanks a million in advance,
Tomas