This patch adds codec node for TI TAS571x on UniPhier LD11/20 global boards. And adds settings of AIO for speaker out.
Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com
---
Changes in v3: - Use phandle of endpoint directly instead of port node --- .../boot/dts/socionext/uniphier-ld11-global.dts | 21 +++++++++++++++++++++ .../boot/dts/socionext/uniphier-ld20-global.dts | 21 +++++++++++++++++++++ 2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index fb6bf435dc96..f057ee80f38e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -10,6 +10,7 @@
/dts-v1/; #include "uniphier-ld11.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h"
/ { model = "UniPhier LD11 Global Board (REF_LD11_GP)"; @@ -44,6 +45,7 @@ widgets = "Headphone", "Headphone Jack";
dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -71,6 +73,20 @@ &i2c0 { status = "okay";
+ tas5707a@1d { + compatible = "ti,tas5711"; + reg = <0x1d>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; + eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; @@ -94,6 +110,11 @@ status = "okay"; };
+&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + &spdif_hiecout1 { remote-endpoint = <&spdif_tx>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 2d49163cfde4..b2e197bc968c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -10,6 +10,7 @@
/dts-v1/; #include "uniphier-ld20.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h"
/ { model = "UniPhier LD20 Global Board (REF_LD20_GP)"; @@ -44,6 +45,7 @@ widgets = "Headphone", "Headphone Jack";
dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -70,12 +72,31 @@
&i2c0 { status = "okay"; + + tas5707@1b { + compatible = "ti,tas5711"; + reg = <0x1b>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; };
&nand { status = "okay"; };
+&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + &spdif_hiecout1 { remote-endpoint = <&spdif_tx>; };