The patch
ASoC: nau8825: set clear_irq when imm IRQ happened
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From e3fee43a968fd39dcc56be3757fcdfe250964125 Mon Sep 17 00:00:00 2001
From: John Hsu KCHSU0@nuvoton.com Date: Thu, 30 Nov 2017 10:13:17 +0800 Subject: [PATCH] ASoC: nau8825: set clear_irq when imm IRQ happened
Although the crosstalk is disabled, it is better to set clear_irq properly when the impedance measurement interrupt happens. It can avoid that the driver clears other IRQs by accident if the active_irq has another IRQ events.
Signed-off-by: John Hsu KCHSU0@nuvoton.com Reviewed-by: Wu-Cheng Li wuchengli@chromium.org Tested-by: Wu-Cheng Li wuchengli@chromium.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/nau8825.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index d3c1a02f1e15..603cd72c2a25 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1733,10 +1733,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_event_mask = event_mask; } } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { - if (nau8825->xtalk_enable) { + if (nau8825->xtalk_enable) schedule_work(&nau8825->xtalk_work); - clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; - } + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == NAU8825_JACK_INSERTION_DETECTED) { /* One more step to check GPIO status directly. Thus, the