On 23 May 2018 07:14, Mac Chiang wrote:
From: Mac Chiang mac.chiang@intel.com
unexpected error: PLL input clock 0 below valid range
backport from broonie's tree commit fd0f237572ad ("ASoC: Intel: bxt: Move codec sysclk config to codec_init function")
The MCLK for DA7219 does not change in this platform, but is currently being configured everytime as part of the platform_clock event handler for DAPM. The upshot of this is that we have unnecessary calls to this function, and it also means that if a stream hasn't yet been started, DA7219 driver does not have the correct MCLK rates programmed and so the HP detection feature does not operate as expected.
This patch rectifies this issue by moving the sysclk call to codec_init function so it's only called once at initialisation.
Signed-off-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com Acked-by: Sathyanarayana Nujella sathyanarayana.nujella@intel.com Singed-off-by: Mac Chiang mac.chiang@intel.com
sound/soc/intel/boards/kbl_da7219_max98357a.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c index 60e739f..88fbc6a 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98357a.c +++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c @@ -65,14 +65,6 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; }
- /* Configure sysclk for codec */
- ret = snd_soc_dai_set_sysclk(codec_dai, DA7219_CLKSRC_MCLK, 24576000,
SND_SOC_CLOCK_IN);
Code here is setting the MCLK rate for the codec as being 24.576MHz but...
- if (ret) {
dev_err(card->dev, "can't set codec sysclk configuration\n");return ret;- }
- if (SND_SOC_DAPM_EVENT_OFF(event)) { ret = snd_soc_dai_set_pll(codec_dai, 0, DA7219_SYSCLK_MCLK, 0, 0);
@@ -169,9 +161,18 @@ static int kabylake_da7219_codec_init(struct snd_soc_pcm_runtime *rtd) { struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_component *component = rtd->codec_dai->component;
struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_jack *jack; int ret;
/* Configure sysclk for codec */
ret = snd_soc_dai_set_sysclk(codec_dai, DA7219_CLKSRC_MCLK, 19200000,
SND_SOC_CLOCK_IN);
...here you're setting MCLK rate to be 19.2MHz. Is that correct?
- if (ret) {
dev_err(rtd->dev, "can't set codec sysclk configuration\n");return ret;- }
- /*
- Headset buttons map to the google Reference headset.
- These can be configured by userspace.
-- 2.7.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel