The RST (reset-gpios) is low active so the driver must handle it accordingly.
Add comments to explain clearly how the line is used.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/codecs/pcm3168a.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/pcm3168a.c b/sound/soc/codecs/pcm3168a.c index f3475134b519..9711fab296eb 100644 --- a/sound/soc/codecs/pcm3168a.c +++ b/sound/soc/codecs/pcm3168a.c @@ -707,11 +707,15 @@ int pcm3168a_probe(struct device *dev, struct regmap *regmap) dev_set_drvdata(dev, pcm3168a);
/* - * Request the RST gpio line as non exclusive as the same reset line - * might be connected to multiple pcm3168a codec + * Request the reset (connected to RST pin) gpio line as non exclusive + * as the same reset line might be connected to multiple pcm3168a codec + * + * The RST is low active, we want the GPIO line to be high initially, so + * request the initial level to LOW which in practice means DEASSERTED: + * The deasserted level of GPIO_ACTIVE_LOW is HIGH. */ - pcm3168a->gpio_rst = devm_gpiod_get_optional(dev, "rst", - GPIOD_OUT_HIGH | + pcm3168a->gpio_rst = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(pcm3168a->gpio_rst)) { ret = PTR_ERR(pcm3168a->gpio_rst); @@ -814,7 +818,13 @@ void pcm3168a_remove(struct device *dev) { struct pcm3168a_priv *pcm3168a = dev_get_drvdata(dev);
- gpiod_set_value_cansleep(pcm3168a->gpio_rst, 0); + /* + * The RST is low active, we want the GPIO line to be low when the + * driver is removed, so set level to 1 which in practice means + * ASSERTED: + * The asserted level of GPIO_ACTIVE_LOW is LOW. + */ + gpiod_set_value_cansleep(pcm3168a->gpio_rst, 1); pm_runtime_disable(dev); #ifndef CONFIG_PM pcm3168a_disable(dev);