At Fri, 19 Oct 2007 14:02:43 +0800, zhejiang wrote:
On Thu, 2007-10-18 at 22:55 +0800, Takashi Iwai wrote:
At Thu, 18 Oct 2007 10:49:16 +0800, zhejiang wrote:
Hi,
Dell 1210 have three jacks on the front. Two of them serve as output jack and one serve as microphone. The microphone can be switched to output model too.
There are some problems with current dell 1210 driver: 1.Unable to use the front microphone 2.Unable to switch the microphone 3.If plug the left hp,another hp will be muted,so it's impossible to work as 6-channel
According to the issue 0003427 on alsa-bugzilla,
Oops is bad. Does it still happen with the latest HG tree? This should be fixed urgently at first.
The oops won't happen with the latest HG tree. The reason of the oops is that there is no input pin.
Now the snd_hda_input_mux_put() will check the input_mux.num_items, if it is equal to zero,snd_hda_input_mux_put() will return directly and avoid the oops.
OK, good to hear.
I wrote a patch and the reporter helped me to test it on his
machine.
It can support the front microphone. When switch the microphone to output model, it can mute/unmute the internal speaker with
jack-sensing.
Thanks for the patch. I have little time right now for checking in details, but the changes appear in fairly deep level.
Yes,It's hard to support such kind of machine with current stac92xx_parse_auto_config().So my patch changed so many generic functions. :-).
I think we should rather fix the current code to handle multiple headphones better than the ad-hoc fixes. Surely there will be other models that require similar fixes (if you see Dell has shipped how many different variants :) Takashi
Great! I think this model should support: 1.Each headphone can mute the internal speaker. 2.Even the Front mic can work output jack 3.When mic works as output jack,it can mute the internal speaker too.
Does this make sense? Thanks!
This sounds good.
Does Dell 1210 have both front and rear mic jacks? I don't know of this machine, so it'd be helpful to understand if you describe the available I/O (PINs and jacks) and expected behavior briefly here. Since sigmatel patch uses the single detection code for every device, we need to cover all possible scenarios with different I/O mappings.
Thanks,
Takashi