On Mon, 10 Apr 2017 14:09:11 +0200, Boris Brezillon wrote:
Eric, Takashi,
On Fri, 07 Apr 2017 10:20:20 -0700 Eric Anholt eric@anholt.net wrote:
Takashi Iwai tiwai@suse.de writes:
On Thu, 06 Apr 2017 21:46:29 +0200, Eric Anholt wrote:
Takashi Iwai tiwai@suse.de writes:
On Thu, 02 Mar 2017 11:49:33 +0100, Boris Brezillon wrote:
Add a conf file for the VC4-HDMI sound card.
Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com
Hi,
Sorry for the noise, but I didn't send this patch to the alsa-lib maintainer on my first attempt.
This patch is adding a card config file for the audio sound card whose driver has been submitted here [1] (not accepted yet).
Since I am a total newbie to the alsa world, I'd like to get some feedback on this patch.
Also, the card only supports 2 to 8 channels, and I wonder if we should add a plug element to support mono streams, and where this element should be added (after or before the iec958 element).
Applied, thanks.
Thanks!
Any recommendations on how to restructure this so that things like 'aplay' from the console also work by default?
Well, once after you have your card config in /usr/share/alsa/cards/vc4-hdmi.conf, aplay should work as is.
If not, check /proc/asounds output. The entry looks like 0 [ID ]: DRIVER - SHORTNAME LONGNAME
and in your case, "DRIVER" must be "vc4-hdmi", as same as the config file name.
It doesn't work as is -- the default ends up not having iec958 conversion, so nothing will play. You can do aplay -D iec958, which works but only as long as you've got stereo input (it seems plug can't do mono-to-stereo on iec958 data)
Sorry for being so silent during the past weeks, but I've been busy with other things and was on vacation last week.
Thanks for joining. I was also slow just because I've been sick and off in the last week :-< Now getting recovered, and resuming the task...
As Eric explained, we're looking for advices on how to best expose the sound card so that it can be easily used by end-users without requiring advanced options (like -D iec958) or conf tweaking (like declaring an extra plug element before the iec958 one to convert from mono to stereo and then using -D iec958-mono).
Takashi, what do you suggest? Is it possible/acceptable to make iec958 the default for this card? What about implicit/automatic mono-to-stereo conversion, is it achievable?
Now I looked at your config again, and one likely problem is that you wrap plug *before* iec958 plugin.
vc4-hdmi.pcm.iec958.0 { ..... type iec958 slave { format IEC958_SUBFRAME_LE pcm { type plug slave.pcm { type hw card $CARD } } } status [ $AES0 $AES1 $AES2 $AES3 ] }
Why do you need to wrap with plug there? Instead, it should be accessing directly to hw, i.e.
vc4-hdmi.pcm.iec958.0 { @args [ CARD AES0 AES1 AES2 AES3 ] @args.CARD { type string } @args.AES0 { type integer } @args.AES1 { type integer } @args.AES2 { type integer } @args.AES3 { type integer } type iec958 slave { format IEC958_SUBFRAME_LE pcm { type hw card $CARD } } status [ $AES0 $AES1 $AES2 $AES3 ] }
Then the plug above this plugin should work.
% aplay -D plug:hdmi foo.wav
(Note that plug over plug doesn't work -- that's the likely reason it failed before.)
Then, about the default PCM: I wonder whether the dmix is feasible at all with this kind of setup. What format does work with this device?
Takashi