Also convert to use update_bits() while we're at it. No great need to do this, it's just a bit neater to do as much as possible in the I2C probe.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8903.c | 63 ++++++++++++++++++++++----------------------- 1 file changed, 31 insertions(+), 32 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 21c4dd2..9410d54 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -2096,7 +2096,6 @@ static int wm8903_probe(struct snd_soc_codec *codec) { struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int ret; - u16 val;
wm8903->codec = codec; codec->control_data = wm8903->regmap; @@ -2110,37 +2109,6 @@ static int wm8903_probe(struct snd_soc_codec *codec) /* power on device */ wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- /* Latch volume update bits */ - val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT); - val |= WM8903_ADCVU; - snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val); - snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val); - - val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT); - val |= WM8903_DACVU; - snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val); - snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val); - - val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT); - val |= WM8903_HPOUTVU; - snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val); - snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val); - - val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT); - val |= WM8903_LINEOUTVU; - snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val); - snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val); - - val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT); - val |= WM8903_SPKVU; - snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val); - snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val); - - /* Enable DAC soft mute by default */ - snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1, - WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE, - WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE); - return ret; }
@@ -2397,6 +2365,37 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, WM8903_IM_WSEQ_BUSY_EINT, 0); }
+ /* Latch volume update bits */ + regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT, + WM8903_ADCVU, WM8903_ADCVU); + regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT, + WM8903_ADCVU, WM8903_ADCVU); + + regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT, + WM8903_DACVU, WM8903_DACVU); + regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT, + WM8903_DACVU, WM8903_DACVU); + + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT, + WM8903_HPOUTVU, WM8903_HPOUTVU); + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT, + WM8903_HPOUTVU, WM8903_HPOUTVU); + + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT, + WM8903_LINEOUTVU, WM8903_LINEOUTVU); + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT, + WM8903_LINEOUTVU, WM8903_LINEOUTVU); + + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT, + WM8903_SPKVU, WM8903_SPKVU); + regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT, + WM8903_SPKVU, WM8903_SPKVU); + + /* Enable DAC soft mute by default */ + regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1, + WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE, + WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE); + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8903, &wm8903_dai, 1); if (ret != 0)