Hi Yu-Hsun,
Thank you for your patch. Some comments below.
On 13/1/21 9:17, Yu-Hsuan Hsu wrote:
It is not guaranteed that I2S RX is disabled when the kernel booting. For example, if the kernel crashes while it is enabled, it will keep enabled until the next time EC reboots. Reset I2S RX when probing to fix this issue.
Signed-off-by: Yu-Hsuan Hsu yuhsuan@chromium.org
This patch checks the return value. If it is -ENOPROTOOPT (EC_RES_INVALID_VERSION), it will ask clients to update EC firmware.
Previous patches
v1: https://patchwork.kernel.org/project/alsa-devel/patch/20200708071117.3070707...
v2: https://patchwork.kernel.org/project/alsa-devel/patch/20200716170914.3623060...
v3: https://patchwork.kernel.org/project/alsa-devel/patch/20210106050559.1459027...
v4: https://patchwork.kernel.org/project/alsa-devel/patch/20210107085942.2891525...
include/linux/platform_data/cros_ec_commands.h | 1 +
Sorry if I confused you with my last comments, but this should be a separate patch.
sound/soc/codecs/cros_ec_codec.c | 11 +++++++++++ 2 files changed, 12 insertions(+)
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 86376779ab31..95889ada83a3 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -4600,6 +4600,7 @@ enum ec_codec_i2s_rx_subcmd { EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2, EC_CODEC_I2S_RX_SET_DAIFMT = 0x3, EC_CODEC_I2S_RX_SET_BCLK = 0x4,
- EC_CODEC_I2S_RX_RESET = 0x5, EC_CODEC_I2S_RX_SUBCMD_COUNT,
};
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index f33a2a9654e7..d35c57724b45 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -1011,6 +1011,17 @@ static int cros_ec_codec_platform_probe(struct platform_device *pdev) } priv->ec_capabilities = r.capabilities;
- /* Reset EC codec i2s rx. */
- p.cmd = EC_CODEC_I2S_RX_RESET;
- ret = send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
(uint8_t *)&p, sizeof(p), NULL, 0);- if (ret == -ENOPROTOOPT) {
dev_info(dev,"Command not found. Please update the EC firmware.\n");- } else if (ret) {
dev_err(dev, "failed to EC_CODEC_I2S_RESET: %d\n", ret);
On an error you should return the error and don't continue.
Thanks, Enric
}
platform_set_drvdata(pdev, priv);
ret = devm_snd_soc_register_component(dev, &i2s_rx_component_driver,