The patch
ASoC: wm9090: replace codec to component
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 2822e66bb812489aff9c41f4b265fcc2d8613989 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Date: Mon, 29 Jan 2018 03:10:09 +0000 Subject: [PATCH] ASoC: wm9090: replace codec to component
Now we can replace Codec to Component. Let's do it.
Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/wm9090.c | 109 ++++++++++++++++++++++------------------------ 1 file changed, 53 insertions(+), 56 deletions(-)
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 5a131385cb2f..a9f1a0360a19 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg) } }
-static void wait_for_dc_servo(struct snd_soc_codec *codec) +static void wait_for_dc_servo(struct snd_soc_component *component) { unsigned int reg; int count = 0;
- dev_dbg(codec->dev, "Waiting for DC servo...\n"); + dev_dbg(component->dev, "Waiting for DC servo...\n"); do { count++; msleep(1); - reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0); - dev_dbg(codec->dev, "DC servo status: %x\n", reg); + reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0); + dev_dbg(component->dev, "DC servo status: %x\n", reg); } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK) != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK) != WM9090_DCS_CAL_COMPLETE_MASK) - dev_err(codec->dev, "Timed out waiting for DC Servo\n"); + dev_err(component->dev, "Timed out waiting for DC Servo\n"); }
static const DECLARE_TLV_DB_RANGE(in_tlv, @@ -251,22 +251,22 @@ SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1, static int hp_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); - unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0);
switch (event) { case SND_SOC_DAPM_POST_PMU: - snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, + snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1, WM9090_CP_ENA, WM9090_CP_ENA);
msleep(5);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY; - snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
/* Start the DC servo. We don't currently use the * ability to save the state since we don't have full @@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w, * DC offsets; see the WM8904 driver for an example of * doing so. */ - snd_soc_write(codec, WM9090_DC_SERVO_0, + snd_soc_component_write(component, WM9090_DC_SERVO_0, WM9090_DCS_ENA_CHAN_0 | WM9090_DCS_ENA_CHAN_1 | WM9090_DCS_TRIG_STARTUP_1 | WM9090_DCS_TRIG_STARTUP_0); - wait_for_dc_servo(codec); + wait_for_dc_servo(component);
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT | WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT; - snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg); break;
case SND_SOC_DAPM_PRE_PMD: @@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w, WM9090_HPOUT1R_DLY | WM9090_HPOUT1R_OUTP);
- snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
- snd_soc_write(codec, WM9090_DC_SERVO_0, 0); + snd_soc_component_write(component, WM9090_DC_SERVO_0, 0);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, 0);
- snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, + snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1, WM9090_CP_ENA, 0); break; } @@ -419,10 +419,10 @@ static const struct snd_soc_dapm_route audio_map_in2_diff[] = { { "IN2A PGA", NULL, "IN2-" }, };
-static int wm9090_add_controls(struct snd_soc_codec *codec) +static int wm9090_add_controls(struct snd_soc_component *component) { - struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); int i;
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets, @@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_add_codec_controls(codec, wm9090_controls, + snd_soc_add_component_controls(component, wm9090_controls, ARRAY_SIZE(wm9090_controls));
if (wm9090->pdata.lin1_diff) { @@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) } else { snd_soc_dapm_add_routes(dapm, audio_map_in1_se, ARRAY_SIZE(audio_map_in1_se)); - snd_soc_add_codec_controls(codec, wm9090_in1_se_controls, + snd_soc_add_component_controls(component, wm9090_in1_se_controls, ARRAY_SIZE(wm9090_in1_se_controls)); }
@@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) } else { snd_soc_dapm_add_routes(dapm, audio_map_in2_se, ARRAY_SIZE(audio_map_in2_se)); - snd_soc_add_codec_controls(codec, wm9090_in2_se_controls, + snd_soc_add_component_controls(component, wm9090_in2_se_controls, ARRAY_SIZE(wm9090_in2_se_controls)); }
if (wm9090->pdata.agc_ena) { for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++) - snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i, + snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i, wm9090->pdata.agc[i]); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3, WM9090_AGC_ENA, WM9090_AGC_ENA); } else { - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3, WM9090_AGC_ENA, 0); }
@@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) * The machine driver should call this from their set_bias_level; if there * isn't one then this can just be set as the set_bias_level function. */ -static int wm9090_set_bias_level(struct snd_soc_codec *codec, +static int wm9090_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { - struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); + struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
switch (level) { case SND_SOC_BIAS_ON: break;
case SND_SOC_BIAS_PREPARE: - snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA, + snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA, WM9090_VMID_ENA); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, WM9090_BIAS_ENA | @@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, break;
case SND_SOC_BIAS_STANDBY: - if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { /* Restore the register cache */ regcache_sync(wm9090->regmap); } @@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, * ground referenced outputs and class D speaker mean that * latency is not an issue. */ - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0); - snd_soc_update_bits(codec, WM9090_ANTIPOP2, + snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA, 0); break;
@@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, return 0; }
-static int wm9090_probe(struct snd_soc_codec *codec) +static int wm9090_probe(struct snd_soc_component *component) { /* Configure some defaults; they will be written out when we * bring the bias up. */ - snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME, WM9090_IN1_VU | WM9090_IN1A_ZC, WM9090_IN1_VU | WM9090_IN1A_ZC); - snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME, WM9090_IN1_VU | WM9090_IN1B_ZC, WM9090_IN1_VU | WM9090_IN1B_ZC); - snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME, WM9090_IN2_VU | WM9090_IN2A_ZC, WM9090_IN2_VU | WM9090_IN2A_ZC); - snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME, WM9090_IN2_VU | WM9090_IN2B_ZC, WM9090_IN2_VU | WM9090_IN2B_ZC); - snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT, + snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT, WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC, WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC); - snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME, + snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME, WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC); - snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME, + snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME, WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
- snd_soc_update_bits(codec, WM9090_CLOCKING_1, + snd_soc_component_update_bits(component, WM9090_CLOCKING_1, WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
- wm9090_add_controls(codec); + wm9090_add_controls(component);
return 0; }
-static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = { - .probe = wm9090_probe, - .set_bias_level = wm9090_set_bias_level, - .suspend_bias_off = true, +static const struct snd_soc_component_driver soc_component_dev_wm9090 = { + .probe = wm9090_probe, + .set_bias_level = wm9090_set_bias_level, + .suspend_bias_off = 1, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, };
static const struct regmap_config wm9090_regmap = { @@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm9090);
- ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm9090, NULL, 0); + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_wm9090, NULL, 0); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); return ret; @@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, return 0; }
-static int wm9090_i2c_remove(struct i2c_client *i2c) -{ - snd_soc_unregister_codec(&i2c->dev); - return 0; -} - static const struct i2c_device_id wm9090_id[] = { { "wm9090", 0 }, { "wm9093", 0 }, @@ -635,7 +633,6 @@ static struct i2c_driver wm9090_i2c_driver = { .name = "wm9090", }, .probe = wm9090_i2c_probe, - .remove = wm9090_i2c_remove, .id_table = wm9090_id, };