The "OUT Channel Switch" control is a left over from code copied from thr rt5640 codec driver.
With the rt5640 codec driver the output volume controls have 2 pairs of mute bits: bit 7, 15: Mute Control for Spk/Headphone/Line Output Port bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel
Bits 7 and 15 are normal mute bits on the rt5670/5672 which are controlled by 2 dapm widgets: SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0, &lout_l_enable_control), SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0, &lout_r_enable_control),
But on the 5670/5672 bit 6 is always reserved, where as bit 14 is "LOUT Differential Mode" on the 5670 and also reserved on the 5672.
So the "OUT Channel Switch" control which is controlling bits 6+14 of the "LINE Output Control" register is bogus -> remove it.
This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "OUT Channel Switch" control.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/codecs/rt5670.c | 2 -- sound/soc/codecs/rt5670.h | 4 ---- 2 files changed, 6 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index a0c8f58d729b..b13d9e0e0e61 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -637,8 +637,6 @@ static const struct snd_kcontrol_new rt5670_snd_controls[] = { RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 39, 1, out_vol_tlv), /* OUTPUT Control */ - SOC_DOUBLE("OUT Channel Switch", RT5670_LOUT1, - RT5670_VOL_L_SFT, RT5670_VOL_R_SFT, 1, 1), SOC_DOUBLE_TLV("OUT Playback Volume", RT5670_LOUT1, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 39, 1, out_vol_tlv), /* DAC Digital Volume */ diff --git a/sound/soc/codecs/rt5670.h b/sound/soc/codecs/rt5670.h index 56b13fe6bd3c..f9c4db156c80 100644 --- a/sound/soc/codecs/rt5670.h +++ b/sound/soc/codecs/rt5670.h @@ -212,12 +212,8 @@ /* global definition */ #define RT5670_L_MUTE (0x1 << 15) #define RT5670_L_MUTE_SFT 15 -#define RT5670_VOL_L_MUTE (0x1 << 14) -#define RT5670_VOL_L_SFT 14 #define RT5670_R_MUTE (0x1 << 7) #define RT5670_R_MUTE_SFT 7 -#define RT5670_VOL_R_MUTE (0x1 << 6) -#define RT5670_VOL_R_SFT 6 #define RT5670_L_VOL_MASK (0x3f << 8) #define RT5670_L_VOL_SFT 8 #define RT5670_R_VOL_MASK (0x3f)