The statement that snd_soc_tdm_params_to_bclk() is equivalent to snd_soc_params_to_bclk() if tdm_width==tdm_slots==0 is not accurate, it is only true is slot_multiple is also <2.
However, the description of special-case behaviour in terms of pairs of tdm_width and tdm_slot values is not particularly helpful so we might as well take the opportunity to rework the description to say the same thing in a simpler way. The behaviour of a pair of values is obvious from a description of each argument. At the same time make a few edits to clarify the rest of the description.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com --- sound/soc/soc-utils.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 70c380c0ac7b..a3b6df2378b4 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -56,23 +56,24 @@ EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk); /** * snd_soc_tdm_params_to_bclk - calculate bclk from params and tdm slot info. * - * Calculate the bclk from the params sample rate and the tdm slot count and - * tdm slot width. Either or both of tdm_width and tdm_slots can be 0. + * Calculate the bclk from the params sample rate, the tdm slot count and the + * tdm slot width. Optionally round-up the slot count to a given multiple. + * Either or both of tdm_width and tdm_slots can be 0. * - * If tdm_width == 0 and tdm_slots > 0: the params_width will be used. - * If tdm_width > 0 and tdm_slots == 0: the params_channels will be used - * as the slot count. - * Both tdm_width and tdm_slots are 0: this is equivalent to calling - * snd_soc_params_to_bclk(). + * If tdm_width == 0: use params_width() as the slot width. + * If tdm_slots == 0: use params_channels() as the slot count. * - * If slot_multiple > 1 the slot count (or params_channels if tdm_slots == 0) - * will be rounded up to a multiple of this value. This is mainly useful for + * If slot_multiple > 1 the slot count (or params_channels() if tdm_slots == 0) + * will be rounded up to a multiple of slot_multiple. This is mainly useful for * I2S mode, which has a left and right phase so the number of slots is always * a multiple of 2. * + * If tdm_width == 0 && tdm_slots == 0 && slot_multiple < 2, this is equivalent + * to calling snd_soc_params_to_bclk(). + * * @params: Pointer to struct_pcm_hw_params. - * @tdm_width: Width in bits of the tdm slots. - * @tdm_slots: Number of tdm slots per frame. + * @tdm_width: Width in bits of the tdm slots. Must be >= 0. + * @tdm_slots: Number of tdm slots per frame. Must be >= 0. * @slot_multiple: If >1 roundup slot count to a multiple of this value. * * Return: bclk frequency in Hz, else a negative error code if params format