Hi Nicolin,
Am Donnerstag, den 30.01.2014, 13:46 +0800 schrieb Nicolin Chen:
Hi Philipp,
On Wed, Jan 29, 2014 at 05:47:27PM +0100, Philipp Zabel wrote:
This adds support for i.MX boards with Analog Devices SSM2603 codecs connected via I2S with separate Tx and Rx clocks.
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de
sound/soc/fsl/Kconfig | 12 +++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-ssm2603.c | 239 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 sound/soc/fsl/imx-ssm2603.c
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index b7ab71f..8a4ff4e 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -212,4 +212,16 @@ config SND_SOC_IMX_MC13783 select SND_SOC_MC13783 select SND_SOC_IMX_PCM_DMA
+config SND_SOC_IMX_SSM2603
- tristate "SoC Audio support for i.MX boards with ssm2603"
- depends on OF && I2C
- select SND_SOC_SSM2602
- select SND_SOC_IMX_PCM_DMA
- select SND_SOC_IMX_AUDMUX
- select SND_SOC_FSL_SSI
- select SND_SOC_FSL_UTILS
Not sure if this UTILS is essential...
+static int imx_ssm2603_probe(struct platform_device *pdev) +{
- ret = snd_soc_register_card(&data->card);
devm_ might be better?
right, I'll change both.
thanks Philipp