4 Jul
2010
4 Jul
'10
11:05 a.m.
On Sat, Jul 03, 2010 at 02:46:12AM +0200, Maurus Cuelenaere wrote:
This adds sound support for the SmartQ board.
The hardware consists of a S3C6410 coupled with a WM8987 over I²S. The WM8750 driver is used for driving the WM8987, as they are register compatible.
I've applied this, but...
+static struct snd_soc_jack_pin smartq_jack_pins[] = {
- /* Disable speaker when headphone is plugged in */
- {
.pin = "Internal Speaker",.mask = SND_JACK_HEADPHONE,.invert = true,- },
+};
...it probably also make sense to disable the headphone output when the headphone is not plugged in to save power?