In cs35l56_hda_read_acpi() do not return if ACPI _SUB is missing.
A missing _SUB means that the driver cannot load a system-specific firmware, because the firmware is identified by the _SUB. But it can fallback to a generic firmware. Unfortunately this was being handled by immediately returning 0, which would skip the remaining ACPI configuration in cs35l56_hda_read_acpi() and so it would not get the RESET GPIO.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") --- sound/pci/hda/cs35l56_hda.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 9e4976bdb5e0..a9844336bdc9 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -864,15 +864,11 @@ static int cs35l56_hda_read_acpi(struct cs35l56_hda *cs35l56, int id)
sub = acpi_get_subsystem_id(ACPI_HANDLE(cs35l56->base.dev));
- if (IS_ERR(sub)) { - /* If no ACPI SUB, return 0 and fallback to legacy firmware path, otherwise fail */ - if (PTR_ERR(sub) == -ENODATA) - return 0; - else - return PTR_ERR(sub); - } - - cs35l56->system_name = sub; + if (IS_ERR(sub)) + dev_err_probe(cs35l56->base.dev, PTR_ERR(sub), + "Read ACPI _SUB failed: fallback to generic firmware\n"); + else + cs35l56->system_name = sub;
cs35l56->base.reset_gpio = devm_gpiod_get_index_optional(cs35l56->base.dev, "reset",