Currently the IRQ handler in HD-audio controller driver is registered before the chip initialization. That is, we have some window opened between the azx_acquire_irq() call and the CORB/RIRB setup. If an interrupt is triggered in this small window, the IRQ handler may access to the uninitialized RIRB buffer, which leads to a NULL dereference Oops.
This is usually no big problem since most of Intel chips do register the IRQ via MSI, and we've already fixed the order of the IRQ enablement and the CORB/RIRB setup in the former commit b61749a89f82 ("sound: enable interrupt after dma buffer initialization"), hence the IRQ won't be triggered in that room. However, some platforms use a shared IRQ, and this may allow the IRQ trigger by another source.
Another possibility is the kdump environment: a stale interrupt might be present in there, the IRQ handler can be falsely triggered as well.
For covering this small race, let's move the azx_acquire_irq() call after hda_intel_init_chip() call. Although this is a bit radical change, it can cover more widely than checking the CORB/RIRB setup locally in the callee side.
Reported-by: Liwei Song liwei.song@windriver.com Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/hda/hda_intel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 2ec91085fa3e..789308f54785 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1788,9 +1788,6 @@ static int azx_first_init(struct azx *chip) chip->msi = 0; }
- if (azx_acquire_irq(chip, 0) < 0) - return -EBUSY; - pci_set_master(pci); synchronize_irq(bus->irq);
@@ -1904,6 +1901,9 @@ static int azx_first_init(struct azx *chip) return -ENODEV; }
+ if (azx_acquire_irq(chip, 0) < 0) + return -EBUSY; + strcpy(card->driver, "HDA-Intel"); strlcpy(card->shortname, driver_short_names[chip->driver_type], sizeof(card->shortname));