Hello Alexander. I compiled the kernel with your patch but the result unfortunately it's the same. The audio device is still not working, dmesg shows the same message that clock source is not valid. Any other idea? Thanks a lotTobias
Gesendet von Yahoo Mail auf Android
Am Di., Jan. 21, 2020 at 12:00 schrieb Alexander Tsoyalexander@tsoy.me: Please try the patch below. Make sure that no other patches are applied.
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 82184036437b..7264f57d3188 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1553,6 +1553,13 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) msleep(20);
+ /* + * Denon MC7000 + */ + if (chip->usb_id == USB_ID(0x15e4, 0x8004) && + (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) + msleep(20); + /* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here, * otherwise requests like get/set frequency return as failed despite * actually succeeding.
В Вт, 21/01/2020 в 09:17 +0100, Tobias пишет:
Thanks a lot for the hint Alexander. Anyhow, I am not sure where to put that. Also Takashi Iwai was involved already and I would like to prevent mixing up things or double work.
Please advise in detail what I would need to do as I am not a programmer.
Thanks a lot. Tobias
Am 20.01.20 um 09:22 schrieb Alexander Tsoy:
В Сб, 14/12/2019 в 09:24 +0100, Tobias пишет:
Hello dear ALSA developers.
I have purchased a MC7000 controller in order to control MIXXX on Ubuntu 16.04. According to the Denon specification the controller should have been class compliant but there is an issue with the Audio interface to work properly giving following message ...
$ dmesg ...
[ 74.522831] usb 1-1.3: new high-speed USB device number 6 using xhci_hcd
[ 74.623784] usb 1-1.3: New USB device found, idVendor=15e4, idProduct=8004 [ 74.623789] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.623793] usb 1-1.3: Product: DENON DJ MC7000 [ 74.623796] usb 1-1.3: Manufacturer: DENON DJ [ 74.623798] usb 1-1.3: SerialNumber: 201603 [ 74.625134] usb 1-1.3: clock source 65 is not valid, cannot use
"|||clock source 65 is not valid, cannot use" is repeated uncountable times then
Please try to add delay after each class control request in snd_usb_ctl_msg_quirk():
if (chip->usb_id == USB_ID(0x15e4, 0x8004) && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) msleep(20);