On 02/08/2023 14:02, Shengjiu Wang wrote:
On Wed, Aug 2, 2023 at 7:22 PM Takashi Iwai tiwai@suse.de wrote:
On Wed, 02 Aug 2023 09:32:37 +0200, Hans Verkuil wrote:
Hi all,
On 25/07/2023 08:12, Shengjiu Wang wrote:
Audio signal processing has the requirement for memory to memory similar as Video.
This patch is to add this support in v4l2 framework, defined new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format for audio case usage.
The created audio device is named "/dev/audioX".
And add memory to memory support for two kinds of i.MX ASRC module
Before I spend time on this: are the audio maintainers OK with doing this in V4L2?
I do want to have a clear statement on this as it is not something I can decide.
Well, I personally don't mind to have some audio capability in v4l2 layer. But, the only uncertain thing for now is whether this is a must-have or not.
Thanks, I am also not sure about this. I am also confused that why there is no m2m implementation for audio in the kernel. Audio also has similar decoder encoder post-processing as video.
IIRC, the implementation in the sound driver side was never done just because there was no similar implementation? If so, and if the extension to the v4l2 core layer is needed, shouldn't it be more considered for the possible other route?
Actually I'd like someone could point me to the other route. I'd like to try.
The reason why I select to extend v4l2 for such audio usage is that v4l2 looks best for this audio m2m implementation. v4l2 is designed for m2m usage. if we need implement another 'route', I don't think it can do better that v4l2.
I appreciate that someone can share his ideas or doable solutions. And please don't ignore my request, ignore my patch.
To give a bit more background: if it is decided to use the v4l API for this (and I have no objection to this from my side since API/framework-wise it is a good fit for this), then there are a number of things that need to be done to get this into the media subsystem:
- documentation for the new uAPI - add support for this to v4l2-ctl - add v4l2-compliance tests for the new device - highly desirable: have a virtual driver (similar to vim2m) that supports this: it could be as simple as just copy input to output. This helps regression testing. - it might need media controller support as well. TBD.
None of this is particularly complex, but taken all together it is a fair amount of work that also needs a lot of review time from our side.
I want to add one more option to the mix: drivers/media/core/v4l2-mem2mem.c is the main m2m framework, but it relies heavily on the videobuf2 framework for the capture and output queues.
The core vb2 implementation in drivers/media/common/videobuf2/videobuf2-core.c is independent of V4L2 and can be used by other subsystems (in our case, it is also used by the DVB API). It is a possibility to create an alsa version of v4l2-mem2mem.c that uses the core vb2 code with an ALSA uAPI on top.
So in drivers/media/common/videobuf2/ you would have a videobuf2-alsa.c besides the already existing videobuf2-v4l2.c and -dvb.c.
Perhaps parts of v4l2-mem2mem.c can be reused as well in that case, but I am not sure if it is worth the effort. I suspect copying it to an alsa-mem2mem.c and adapting it for alsa is easiest if you want to go that way.
Regards,
Hans