On Wed, 17 May 2017 08:24:09 +0200, Kuninori Morimoto wrote:
Hi ALSA ML
We noticed that our PulseAudio has crackling / skipping noise which doesn't happen on normal aplay. And it was removed if we do below
load-module module-hal-detect tsched=0
According to google, it say
tsched Since 0.9.11. Use system-timer based model (aka glitch-free). Defaults to 1 (enabled). If your hardware does not return accurate timing information (e.g. Creative sound cards) you can try to set tsched=0 to enable the interupt based timing which was used in 0.9.10 and before.
Here, what does this "return accurate timing information" mean ? Is it struct snd_pcm_ops::pointer ??
Yes. Also runtime->delay is taken into account.
Both information have to be accurate enough. With tsched=1, the period update is basically ignored and PA tries to update the buffer at its own timing. The samples to be updated are determined by avail and delay values of snd_pcm_status, which are calculated from hw_ptr, appl_ptr and delay in the kernel.
Also, such a problem might be some memory coherency issue.
Takashi