Hi Sergey,
Best to always CC Mark on any ASoC patches, I've also added Richard from Wolfson. Best to read submitting patches from the Documentation directory too :)
On Thu, 2015-05-28 at 09:34 -0700, Sergey Kiselev wrote:
Hi,
I am working on a machine driver that uses wm8731 codec and I've noticed that it will not work after rmmod/modprobe of that machine driver. The issue is that wm8731_probe() resets the hardware, but it doesn't reinitialize the regmap cache to the default values.
The patch below fixes this issue.
I also skimmed through other codecs, and some of them might have similar issue (wm8510.c, wm8711.c, wm8750.c, wm8753.c, wm8940.c, wm8960.c, wm8971.c, wm8974.c, wm8988.c, wm8990.c)
Richard, can Wolfson take care of these ones. I guess some of the older codecs have no way to reset the registers ?
Another way to avoid this issue might be resetting the codec in the *_spi_probe()/*_i2c_probe(), so that it only gets reset once when codec is loading.
Thanks in advance for any comments/suggestions on the patch.
Thanks, Sergey
Signed-off-by: Sergey Kiselev skiselev@gmail.com
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 2245b6a..76af75b 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev, unsigned int reg) return reg <= WM8731_RESET; }
-#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)
I would have expected this to reset the register values so I'm not sure why it's failing in your case ?
+static int wm8731_reset(struct snd_soc_codec *codec);
static const char *wm8731_input_select[] = {"Line In", "Mic"};
@@ -665,6 +665,21 @@ static const struct regmap_config wm8731_regmap = { .num_reg_defaults = ARRAY_SIZE(wm8731_reg_defaults), };
+static int wm8731_reset(struct snd_soc_codec *codec) +{
- int ret;
- struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
- ret = snd_soc_write(codec, WM8731_RESET, 0);
- if (ret != 0)
- return ret;
- regmap_reinit_cache(wm8731->regmap, &wm8731_regmap);
- return 0;
+}
Your mailer has screwed up the formatting here :(
#if defined(CONFIG_SPI_MASTER) static int wm8731_spi_probe(struct spi_device *spi) {
Liam