On 1/18/23 10:04, Stefan Binding wrote:
From: Richard Fitzgerald rf@opensource.cirrus.com
The SOFT_RESET_REBOOT register is needed to recover CS42L42 state after a Soundwire bus reset.
Humm, you probably want to clarify the terminology, the 'soft reset' is defined in the SoundWire spec as the case where the peripheral device loses sync. Bus reset is a Severe Reset, but there's also a Hard Reset.
does this 'SOFT_RESET_REBOOT' need to be accessed when there's a soft reset, or only after a Severe/Hard Reset?
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com
include/sound/cs42l42.h | 5 +++++ sound/soc/codecs/cs42l42.c | 2 ++ 2 files changed, 7 insertions(+)
diff --git a/include/sound/cs42l42.h b/include/sound/cs42l42.h index 1d1c24fdd0cae..3994e933db195 100644 --- a/include/sound/cs42l42.h +++ b/include/sound/cs42l42.h @@ -34,6 +34,7 @@ #define CS42L42_PAGE_24 0x2400 #define CS42L42_PAGE_25 0x2500 #define CS42L42_PAGE_26 0x2600 +#define CS42L42_PAGE_27 0x2700 #define CS42L42_PAGE_28 0x2800 #define CS42L42_PAGE_29 0x2900 #define CS42L42_PAGE_2A 0x2A00 @@ -720,6 +721,10 @@
#define CS42L42_SRC_SDOUT_FS (CS42L42_PAGE_26 + 0x09)
+/* Page 0x27 DMA */ +#define CS42L42_SOFT_RESET_REBOOT (CS42L42_PAGE_27 + 0x01) +#define CS42L42_SFT_RST_REBOOT_MASK BIT(1)
/* Page 0x28 S/PDIF Registers */ #define CS42L42_SPDIF_CTL1 (CS42L42_PAGE_28 + 0x01) #define CS42L42_SPDIF_CTL2 (CS42L42_PAGE_28 + 0x02) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 2fefbcf7bd130..82aa11d6937be 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -293,6 +293,7 @@ bool cs42l42_readable_register(struct device *dev, unsigned int reg) case CS42L42_SPDIF_SW_CTL1: case CS42L42_SRC_SDIN_FS: case CS42L42_SRC_SDOUT_FS:
- case CS42L42_SOFT_RESET_REBOOT: case CS42L42_SPDIF_CTL1: case CS42L42_SPDIF_CTL2: case CS42L42_SPDIF_CTL3:
@@ -358,6 +359,7 @@ bool cs42l42_volatile_register(struct device *dev, unsigned int reg) case CS42L42_LOAD_DET_DONE: case CS42L42_DET_STATUS1: case CS42L42_DET_STATUS2:
- case CS42L42_SOFT_RESET_REBOOT: return true; default: return false;