On Fri, Dec 19, 2014 at 04:18:08PM +0000, Andrew Jackson wrote:
+union snd_dma_data {
- struct i2s_dma_data pd;
- struct snd_dmaengine_dai_dma_data dt;
+};
This is a driver local union with a very generic name, it seems likely that this will collide in future causing build breaks
- ret = dev->i2s_clk_cfg(config);
- if (ret < 0) {
dev_err(dev->dev, "runtime audio clk config fail\n");return ret;
/* TODO: Validate sample rate against permissible set */bitclk = config->sample_rate * config->data_width * 2;clk_set_rate(dev->clk, bitclk);
This is ignoring errors in clk_set_rate().
+/* Maximum resolution of a channel - not uniformly spaced */ +static const u32 fifo_width[] = {
- 12, 16, 20, 24, 32, 0, 0, 0
+};
+/* Width of (DMA) bus */ +static const u32 bus_widths[] = {
- DMA_SLAVE_BUSWIDTH_1_BYTE,
- DMA_SLAVE_BUSWIDTH_2_BYTES,
- DMA_SLAVE_BUSWIDTH_4_BYTES,
- DMA_SLAVE_BUSWIDTH_UNDEFINED
+};
- u32 bus_width = bus_widths[COMP1_APB_DATA_WIDTH(comp1)];
- u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
- u32 max_size;
I'd feel a lot more comfortable if there were bounds checking on these array indexes, especially since the arrays aren't explicitly sized and instead just have the number of elements that is (hopefully) safe with no comments or anything. As things stand this is all using really fraigle idioms, this could easily be broken if someone is updating the driver for new IP features or even just cleaning up the code.
- dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
- dev->clk = clk_get(&pdev->dev, NULL);
dev->clk = clk_get(&pdev->dev, NULL);- } else {
dw_configure_dai_by_dt(dev, dw_i2s_dai, res);dev->clk = devm_clk_get(&pdev->dev, "i2sclk");- }
This changes from clk_get() to devm_clk_get() but I'm not seeing anything that removes clk_put() calls.
+#ifdef CONFIG_OF
.of_match_table = dw_i2s_of_match,+#endif
of_match_ptr().