On 9/26/22 17:33, Mark Brown wrote:
On Mon, Sep 26, 2022 at 09:52:34AM +0200, Pierre-Louis Bossart wrote:
On 9/26/22 03:34, Jason Zhu wrote:
在 2022/9/23 20:55, Mark Brown 写道:
The data can not be lost in this process. So we attach VAD & PDM in the same card, then close the card and wake up VAD & PDM again when the system is goto sleep. Like these code:
This sounds like a very normal thing with a standard audio stream - other devices have similar VAD stuff without needing to open code access to the PCM operations?
At present, only VAD is handled in this way by Rockchip.
The point here is that other non-Rockchip devices do similar sounding things?
Generally things just continue to stream the voice data through the same VAD stream IIRC - switching just adds complexity here, you don't have to deal with joining the VAD and regular streams up for one thing.
Yes, this looks complicated. But our chip's sram which is assigned to VAD
maybe used by other devices when the system is alive. So we have to copy
sound data in sram firstly, then use the DDR(SDRAM) to record sound data.
There are other devices that requires a copy of the history buffer from one PCM device and a software stitching with the real-time data coming from another PCM device. It's not ideal but not uncommon either, even for upcoming SDCA devices, combining data from 2 PCM devices will be an allowed option (with additional control information to help with the stitching).
If this is something that's not uncommon that sounds like an even stronger reason for not just randomly exporting the symbols and open coding things in individual drivers outside of framework control. What are these other use cases, or is it other instances of the same thing?
TBH this sounds like at least partly a userspace problem rather than a kernel one, as with other things that tie multiple audio streams together.
I would tend to agree, the stitching can be either handled in DSP firmware or in user-space. In the first case the kernel would expose a single PCM to userspace, and in the second there would be two separate PCM devices. The kernel drivers would typically do nothing other than deal with moving captured data if/when available.
I also don't get the notion of 'keeping some DAIs alive when closing the card', maybe the idea is to redefine what 'D3' means or have an 'active standby' power state that doesn't exist today. That would in contrast be something the frameworks know about.