Add documentation of device tree bindings for the STM32 SPDIFRX interface.
Signed-off-by: olivier moysan olivier.moysan@st.com --- .../devicetree/bindings/sound/st,stm32-spdifrx.txt | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt new file mode 100644 index 0000000..33826f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt @@ -0,0 +1,56 @@ +STMicroelectronics STM32 S/PDIF receiver (SPDIFRX). + +The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with +IEC-60958 and IEC-61937. + +Required properties: + - compatible: should be "st,stm32h7-spdifrx" + - reg: cpu DAI IP base address and size + - clocks: must contain an entry for kclk (used as S/PDIF signal reference) + - clock-names: must contain "kclk" + - interrupts: cpu DAI interrupt line + - dmas: DMA specifiers for audio data DMA and iec control flow DMA + See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt + - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" + +Optional properties: + - resets: Reference to a reset controller asserting the SPDIFRX + +The device node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in Documentation/devicetree/bindings/ +graph.txt. + +Example: +spdifrx: spdifrx@40004000 { + compatible = "st,stm32h7-spdifrx"; + reg = <0x40004000 0x400>; + clocks = <&rcc SPDIFRX_CK>; + clock-names = "kclk"; + interrupts = <97>; + dmas = <&dmamux1 2 93 0x400 0x0>, + <&dmamux1 3 94 0x400 0x0>; + dma-names = "rx", "rx-ctrl"; + pinctrl-0 = <&spdifrx_pins>; + pinctrl-names = "default"; + + spdifrx_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + }; + }; +}; + +spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + + codec_port: port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; +}; + +soundcard { + compatible = "audio-graph-card"; + dais = <&spdifrx_port>; +};