At Fri, 5 Dec 2014 20:10:06 +0100, Alexander Stein wrote:
Clocks must be prepared before enabling them. Do this in one step. Replace clk_enable with clk_prepare_enable and clk_disable with clk_disable_unprepare. This fixes the following warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:895 __clk_enable+0x24/0x9c() Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.0-rc7+ #245 [<c000dce8>] (unwind_backtrace) from [<c000bcf0>] (show_stack+0x10/0x14) [<c000bcf0>] (show_stack) from [<c001664c>] (warn_slowpath_common+0x60/0x80) [<c001664c>] (warn_slowpath_common) from [<c00166fc>] (warn_slowpath_null+0x18/0x20) [<c00166fc>] (warn_slowpath_null) from [<c02fd7ac>] (__clk_enable+0x24/0x9c) [<c02fd7ac>] (__clk_enable) from [<c02fdbb4>] (clk_enable+0x18/0x2c) [<c02fdbb4>] (clk_enable) from [<c0322688>] (atmel_ac97c_probe+0x154/0x694) [<c0322688>] (atmel_ac97c_probe) from [<c0235e08>] (platform_drv_probe+0x48/0x94) [<c0235e08>] (platform_drv_probe) from [<c02345f8>] (driver_probe_device+0x138/0x350) [<c02345f8>] (driver_probe_device) from [<c02348bc>] (__driver_attach+0x68/0x8c) [<c02348bc>] (__driver_attach) from [<c0232bd0>] (bus_for_each_dev+0x70/0x84) [<c0232bd0>] (bus_for_each_dev) from [<c0233cd8>] (bus_add_driver+0xfc/0x1f8) [<c0233cd8>] (bus_add_driver) from [<c0234f0c>] (driver_register+0x9c/0xe0) [<c0234f0c>] (driver_register) from [<c0008ac4>] (do_one_initcall+0x110/0x1c8) [<c0008ac4>] (do_one_initcall) from [<c053cd58>] (kernel_init_freeable+0xf8/0x1b8) [<c053cd58>] (kernel_init_freeable) from [<c03c0414>] (kernel_init+0x8/0xe4) [<c03c0414>] (kernel_init) from [<c00096d0>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa201 ]--- atmel_ac97c fffa0000.sound: AC'97 0 does not respond - RESET atmel_ac97c fffa0000.sound: AC'97 0 access is not valid [0xffffffff], removing mixer. ------------[ cut here ]------------
Signed-off-by: Alexander Stein alexanders83@web.de
Thanks, applied both patches now.
Takashi
sound/atmel/ac97c.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 86f07e9..fa283d3 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -989,7 +989,7 @@ static int atmel_ac97c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "no peripheral clock\n"); return PTR_ERR(pclk); }
- clk_enable(pclk);
clk_prepare_enable(pclk);
retval = snd_card_new(&pdev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, THIS_MODULE,
@@ -1167,7 +1167,7 @@ err_ioremap: err_request_irq: snd_card_free(card); err_snd_card_new:
- clk_disable(pclk);
- clk_disable_unprepare(pclk); clk_put(pclk); return retval;
} @@ -1184,7 +1184,7 @@ static int atmel_ac97c_suspend(struct device *pdev) if (test_bit(DMA_TX_READY, &chip->flags)) dw_dma_cyclic_stop(chip->dma.tx_chan); }
- clk_disable(chip->pclk);
clk_disable_unprepare(chip->pclk);
return 0;
} @@ -1194,7 +1194,7 @@ static int atmel_ac97c_resume(struct device *pdev) struct snd_card *card = dev_get_drvdata(pdev); struct atmel_ac97c *chip = card->private_data;
- clk_enable(chip->pclk);
- clk_prepare_enable(chip->pclk); if (cpu_is_at32ap7000()) { if (test_bit(DMA_RX_READY, &chip->flags)) dw_dma_cyclic_start(chip->dma.rx_chan);
@@ -1222,7 +1222,7 @@ static int atmel_ac97c_remove(struct platform_device *pdev) ac97c_writel(chip, COMR, 0); ac97c_writel(chip, MR, 0);
- clk_disable(chip->pclk);
- clk_disable_unprepare(chip->pclk); clk_put(chip->pclk); iounmap(chip->regs); free_irq(chip->irq, chip);
-- 2.2.0