Hi Pierre,
On 1/4/2023 3:51 PM, Pierre-Louis Bossart wrote:
On 12/23/22 17:31, Wesley Cheng wrote:
Several Qualcomm SoCs have a dedicated audio DSP, which has the ability to support USB sound devices. This vendor driver will implement the required handshaking with the DSP, in order to pass along required resources that will be utilized by the DSP's USB SW. The communication channel used for this handshaking will be using the QMI protocol. Required resources include:
- Allocated secondary event ring address
- EP transfer ring address
- Interrupter number
The above information will allow for the audio DSP to execute USB transfers over the USB bus. It will also be able to support devices that have an implicit feedback and sync endpoint as well. Offloading these data transfers will allow the main/applications processor to enter lower CPU power modes, and sustain a longer duration in those modes.
Are you suggesting that the entire feedback loop be handled in the DSP? It's not clear what "Offloading these data transfers" refers to, the data part or the feedback path?
Yes, as mentioned in the cover letter response, we'll handle the feedback endpoints. (feedback eps are part of the audio data interface)
Comments are almost inexistent in this patch so it's hard to figure out what it really does.
OK, will add some more comments.
Thanks Wesley Cheng