At Mon, 9 Jul 2007 16:36:35 +0200, Xavi de Blas wrote:
2007/7/9, Takashi Iwai tiwai@suse.de:
At Mon, 9 Jul 2007 15:58:30 +0200, Xavi de Blas wrote:
2007/7/9, Takashi Iwai tiwai@suse.de:
At Mon, 9 Jul 2007 15:26:59 +0200, Xavi de Blas wrote:
Hello
2007/7/9, Takashi Iwai tiwai@suse.de:
At Mon, 9 Jul 2007 14:16:43 +0200, Xavi de Blas wrote: > > Hello, I installed Wine on my Ubuntu Feisty on IBM-lenovo X60s, and > after reboot, sound never worked again. > > I tried to activate and to hide modem on the bios. I tried to stop > machine, take off battery, wait 10s, put battery again, and boot > without the power cable connected... and i tried lots of things from > ubuntuforums. I reinstalled feisty and sound doesn't work. > > I used alsa-info.sh script, here is the result: > > http://pastebin.ca/610317
The codec isn't handled via the proper support code but only by the generic parser. It won't work for Thinkpad.
I'm not sure if i understood... then, no solution for me now?
should i try the alsa svn code?
> Should the new kernel 2.6.22 help me?
X60 is known to work with recent kernels (but you'd better to give probe_mask=1 option to avoid the modem codec).
I tried, rebooted and pastebin changed: http://pastebin.ca/610387
This doesn't exist now: # Codec: Conexant ID 2bfa # Address: 1 # Vendor Id: 0x14f12bfa # Subsystem Id: 0x17aa201b # Revision Id: 0x90000
Err, it's a modem codec. Pass probe_mask=2 instead, then.
Now i have still no sound. But there's no messages about hda on dmesg
$ dmesg | grep -i hda
$ tail -2 /etc/modprobe.d/alsa-base options snd-hda-intel probe_mask=2
I commented the /etc/modprobe.d/snd-hda-intel.modprobe
On pastebin: http://pastebin.ca/610431
The "HDA-Intel Codec information" changed a lot.
Still any ideas?
It's really from 2.6.22 kernel? I won't debug 2.6.20 kernel drivers unless you build ALSA 1.0.14 driver from tarball separately.
Once after upgrading 2.6.22 kernel, try at first without any module options for snd-hda-intel. Check /proc/asound/card0/codec#* file (if any) whether it recogizes AD1981 codec. If not, play with probe_mask option. Once after the module gets loaded, then make sure that you unmuted / adjusted the mixer volumes. Use aplay or speaker-test for testing. Finally, if it still doesn't work, report again.
No, it's this kernel: $ uname -a Linux corall 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
I asked about upgrading to 2.6.22, but i'm still on 2.6.20
But i built alsa 1.0.14 separately
Then it should work definitely... at least on Thinkpad X60.
My asound/card... is:
$ cat /proc/asound/card0/codec#* Codec: Conexant ID 2bfa Address: 1 Vendor Id: 0x14f12bfa Subsystem Id: 0x17aa201b Revision Id: 0x90000
If you can help me now, i will be glad, if not, i will try to upload to 2.6.22 as soon as possible. Thanks
Remove all module options for snd-hda-intel. That's the first step. After loading the module, see the file /sys/modules/snd_hda_intel/parameters/probe_mask. This value should be -1 (not 1 or 2).
Honestly, this is a kind of topic that is handled on alsa-users ML...
Takashi