From: Jeeja KP jeeja.kp@intel.com
Like we have in legacy mode HDA driver, we need to check the status bit and handle interrupt only when it is not zero or all bits set. We typically see the status as all 1's when controller resumes from suspend, So add the check here as well and don't handle for these cases.
Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/intel/skylake/skl-sst-dsp.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/soc/intel/skylake/skl-sst-dsp.c b/sound/soc/intel/skylake/skl-sst-dsp.c index 194bd0036454..1bfb7f63b572 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.c +++ b/sound/soc/intel/skylake/skl-sst-dsp.c @@ -262,6 +262,11 @@ irqreturn_t skl_dsp_sst_interrupt(int irq, void *dev_id) val = sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_ADSPIS); ctx->intr_status = val;
+ if (val == 0xffffffff) { + spin_unlock(&ctx->spinlock); + return IRQ_NONE; + } + if (val & SKL_ADSPIS_IPC) { skl_ipc_int_disable(ctx); result = IRQ_WAKE_THREAD;